Specification:
Item Type: Wireless Remote Control Module
Module Introduction:
Input Terminal: Red wire connect to the positive pole of the power supply, black wire connected to the negative pole of the power supply
Working Current: About 40mA (relay pull-in state)
Static Working Current: About 4mA (relay release state)
Receiver Size: Approx. 50 x 35 x 22mm / 2 x 1.4 x 0.9in (with shell, shell with screw hole)
Module Type: 1 button infrared control
Receiving Distance: Approx. 5 ~ 8meters / 16.4 ~ 26.2ft
Working Mode: Self-locking
Work Instructions: LED1 (power indicator light), LED2 (relay switch indicator light)
The module provides NO and NC interfaces after electrical isolation. The load capacity of the relay is 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A, which can drive most household appliances or other equipment to achieve remote control functions.
Instructions:
Module as a "switch". Wiring Method: Input Terminal: Connect the red wire to the 12V positive pole, and the black wire to the negative pole of the 12V power supply. The output terminal only needs to connect your device between the blue and white wires, and the other two are ignored. (But it must not be short-circuited)
Note:
Features:
1This is a single channel 12V relay switch module that can be controlled by IR. 2The infrared remote control has two buttons and control distance is between 5 and 8 meters. 3Designed with working state indicator lights of power supply and relay. 4Module provides NO and NC connector, relay load capacity is 250VAC10A, 125VAC10A, 30VDC10A, 28VDC10A. 5This product can be used for most domestic appliances to realize remote control function.
Package List:
1 x Wireless Remote Control Module
