Specification:
Item Type: Wire Thread Insert
Material: SUS304
Diameter: Approx. 4.826mm / 0.2in
Pitch: Approx. 1.06mm / 0.04in
Length After Installation: Approx. 7.2mm / 0.3in
Number of Turns Before Installation: 5.4
Outside Diameter Before Installation: Approx. 6.1-6.6mm / 0.24-0.26in
Drill Bit Diameter: Approx. 5.1mm / 0.2in
Thread Protective Socket Model Specification Description: For Example: M3 x 0.5 x 1.5D means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5 x 3=4.5mm) , the length here refers to the length after installation.
How to Use:
Step 1: Prepare the butt terminal, and peel off the protective layer of the part where the wire needs to be connected.
Step 2: Unscrew the screw of the terminal block and prepare the stripped wire.
Step 3: Insert one end of the stripped wire into the terminal, and then tighten the screw.
Features:
1The wire thread insert is female thread fastener with certain elasticity, which can enhance the connection strength of the thread. 2304 stainless steel has good corrosion resistance and is not easy to break when repairing thread holes. 3Fit the wire screw set in the screw hole of the metal workpiece to form a wearresistant and highaccuracy standard female thread. 4The wire thread insert can be used to switch between metric and inch threaded holes, which is convenient and quick. 5These repair nuts are mainly used in manufacturing fields such as aviation, automobiles, lamps, molds, and mechanical equipment.
Package List:
50 x Wire Thread Insert
