Specification:
Item Type: Battery Charge and Discharge Module
Product Material: Printed Circuit Board
Product Parameters:
2: Charge and discharge time (OP) range: 0-999 Minutes.
How to Use:
- First determine the working mode of the relay;
- According to the working mode of the relay, in the main interface (when the module is powered on, it will flash the current working mode (default U-1 mode), and then enter the main interface,) "Long press the SET button for 2 seconds and then release to enter the mode selection interface, and select the mode (U-1~U-6) by short pressing the UP and DOWN buttons;
- After setting the parameters of the selected mode, press and hold the SET button for 2 seconds and then release it. The currently set mode will flash, and then return to the main interface. The parameter setting is successful, very simple!
Mode Selection Interface: Long press the SET button to enter, after the setting is completed, long press the SET button to exit and return to the main interface, very simple!
Operating Mode:
Features:
1An additional signal output. When the relay conduction condition is met, the module will output high level to control other devices. 2With serial port communication function, the working status of the relay can be monitored in real time through the serial port. 3Charge and discharge time can be set, and the battery charging board will automatically power off after setting. 4There is a key emergency stop function (STOP key). With reverse connection protection, the reverse connection will not burn. 5This battery charging module is designed for the batteries below 60V, and the error in voltage measuring is less than 0.1V.
Package List:
1 x Battery Charge Discharge Module
