Specification:
Item Type: Wide Voltage Decoding Receiver Module
Size: Approx. 18.8 x 14.8 x 5mm / 0.74 x 0.58 x 0.20in
Technical Parameter:
- Working Current: 3.5mA (433MHz Fully Working)
- Modulation Method: ASK 0OK
- Receiving Sensitivity: -108dBm
- Data Rate: Up to 10kpbs
- The Drive Capacity of Each I0 Port: <20mA
-
Operating Temperature Range: -40-85
Pin Function Description:
VT: Learning button input terminal and decoding valid output terminal, output low level when decoding is valid, otherwise is high yang input state
D3: Data Output Terminal D3 Channel
D2: Data Output Terminal D2 Channel
D1: Data Output Terminal D11 Channel
D0: Data Output Terminal D0 Channel
VCC: Positive Power Supply
GND: Negative Power Supply
Working Mode Description:
-
Self Locking (T4): 4 independent outputs without mutual influence. Each time press the launches button, the output state of the corresponding output terminal is reversed once, with VT pulse output, for example, the data of the A button is 0010, then is not pressed once the A key is pressed, the state of the D1 channel is flipped once
- Jog (M4): Press the launches button, the corresponding output terminal will output high level, and return to low level after stopping transmission, with VVIT pulse output
- Interlock (H4): Press the launches button, the corresponding one channel outputs high level, all other channels all low level, and keep until the following time the remote control data changes, the valid signal is identified by judging the T pulse, for example, the data codes of the button is 1000, then the D3 channel is high level, and the others are low level. If the data codes has multiple bits of high level, determined according to the high bit of the output high level, for example, the data of button 1 , the codes is 0111. According to the above principle, the output of channel D2 is high level, and the others are low level.
Features:
1Intelligent Identification Chip: With intelligent identification chip type support for EV1527, PT2262 and other learning codes, fixed codes (welding codes) IC remote control mixed use 2Strong Compatibility: Compatible with most learning codes and fixed codes (welding codes) chips on the market, including for EV1527, PT2262, HX2262, SC2260, SC5211, HS2240, etc. 3Oscillation Resistance: Intelligently adapt to the oscillation resistance of the transmitting end, without considering the oscillation resistance of the transmitting end, universal, and is triggered by the learning button to perform learning and mode conversion 4Local Vibration Suppression Capability: Good local vibration suppression capability, multiple modules can work together without mutual interference, without affecting the receiving distance, TYJM01AK supports self locking (T4), inching (M4), interlocking (H4) 3 working modes 54 Channel Output: Support 4 channel output, the module comes with learning indicator and VT data effective indication, the operation is more intuitive and convenient, the decoding chip has built in EEPROM, and supports up to 32 groups of remote control memories
Package List:
1 x Decoding Module