Specification:
Item Type: Microphone
Name: UHF/VHF One to Eight Professional Waist-Mounted Microphone Set
Model: X-8608
Battery: 2 AA Batteries x8 (Not Included)
Frequency: 800MHz-890MHz / 700MHz~790MHz (Optional)
Comprehensive Parameters:
Operating Frequency: VHF200MHz-270MHz
Modulation Method: FM
Channel Spacing: 500KHz
Frequency Stability: 0.001%
Frequency Dynamic Range: 100B
Maximum Frequency Offset:25KHz
Frequency Response: 40Hz-20KHz
Integrated Signal to Noise Ratio: >105dB
Comprehensive Distortion: <0.5%@1KHz
Working Distance: About 100m / 328ft (in case of open space without interference)
Working Environment Temperature: -100C-50C
Transmitter Parameters:
Microphone Power Consumption: 100mA/30mA
Carrier Frequency: VHF200MHz-270MHz
Maximum Frequency Offset:25KHz
Signal to Noise Ratio: >105dB
Dynamic Range: 100dB
Type: Moving Coil / Capacitive
Polar Mode: Cardioid / One direction
Frequency Response: 40Hz-20KHz
Microphone Sensitivity: A 473dB@1KHz
Power: 30mW
Receiver Parameters:
Oscillation Mode: Quartz Crystal Oscillation
Frequency Range: VHF200MHz-270MHz
Frequency Stability: 0.001%
Modulation Method: FM
Signal to Noise Ratio: >105dB
Proximity Interference Ratio: >80dB
Distortion: <0.5%@1KHz
Sensitivity: 10dBuV@S/N=12dB
Power Supply: DC 12V-17V
Audio Output: Independent 0-400mV; Mix 0-300mV
Power: Two Channels 1W; Four Channels 4W; Eight Channels 4W
Features:
1Adopt multi-stage high performance acoustic filters to provide excellent immunity to interference. The series is equipped with sophisticated filters in both the high-level and first-stage IF amplifier stages. The characteristics of the sound filter of the second IF amplifier stage, by using a ceramic filter with good consistency, obtain a fine frequency selection filter, which greatly demonstrates high anti-interference ability. 2Professional audio output: XLR balanced output and 6.3 unbalanced output. This series of products, all using XLR independent balanced output and 6.3 unbalanced hybrid output coexist, can adapt to various occasions of equipment connection, avoiding confusion and embarrassment caused by device connection mismatch. 3Automatic mute and engine balance elimination circuit, eliminate off balance machine and other engine noise. This series of products all have automatic mute and balance elimination circuit, clear the switch machine scale, avoid weighing noise and scene noise even damage the audio amplitying equipment and speakers. 4Using highly reliable surface mounting technology(SMT) production. This series of products all use high stability, high relability surface mount components, the use of surface mounting technloy and the applcation of the aging process to detect and elininate the early failure of the components. Compared with the through pin type component, the stability, the reliability and the sevice life of the product are obviously improved. 5VHF200MHz-270MHz operating frequency, 40Hz-20KHz frequency response, working distance is about 100m.
Package List:
Transmitter x 1
Receiver x 8
Audio Cable x 1
Manual x 1
Microphone x 8
Power Adapter x 1
Bracket x 2
Antenna x 4
