Specification:
Item Type: Mobile Charging Module
Material: PCB
Operating Temperature: -20 to +60
Features:
- Switch Charging:
Support 4.2V 4.35V 4.4V 4.5V battery type
Current up to 5A, efficiency up to 95%
Support for JEITA specification
Support temperature loop control
- Synchronous Boost:
Output power is up to 22.5W, efficiency up to 95%
Automatic load detection, light load detection
Support wireless charging mode and low current mode
- Output Fast Charging Protocol:
Support for PPS PD3.0 PD2.0
Support for QC4+ QC4 QC3.0 QC2.0
Support for AFC
Support for PE2.0 PE1.1
Support for SFCP
Support for vooC input fast charging protocol
Support for PD3.0 PD2.0
Support for AFC
Support for FCP
Support for SCP
Support for PE1.1
- Type C Interface:
Built in USB Type C interface logic
Support for Try.SRC function
- BC1.2 Module:
Support for BC1.2DCP mode
Support for IOS, for Samsung mode
- For IOS interface Decryption:
Built in for IOS interface decryption function
- Electricity Metering and Display:
Built in 12bit ADC
Built in coulometer accurate electricity
- Protection Mechanism
Input overvoltage protection, output overcurrent, short circuit protection
Charging timeout, overvoltage protection
Temperature protection
- There are five USB ports on the motherboard: Type A1, Type A2, Micro B, Type C, Lightning. Type A1 and Type A2 support for QC3.0 QC2.0 AFC FCP SCP PE2.0 PE1.1 SFCP VOOC fast charging output. Type C supports for PPS PD3.0 PD2.0 QC4+ QC3.0 QC2.0 AFC FCP SCP PE2.0 PE1.1 SFCP fast charge output and for PD3.0 PD2.0 AFC FCP SCP PE1.1 fast charge input. Micro B supports QC2.0 AFC FCP SCP PE1.1 fast charging input. For IOS interface supports for PD fast charging and 5V 2.4A slow charging. When the input matches the fast charging, the default input is 9V, and the input power is up to 21W.
- Support discharging while charging. Fast charging input and output are supported when single port is working, and 5V input and output are supported when multiple ports are working.
- Support Type A1 Type A2 Type C interface to discharge at the same time.
Features:
1Widely Compatible: The module supports 4.2V 4.35V 4.4V 4.5V battery type, with the current up to 5A, the efficiency is up to 95%, support for JEITA specification and temperature loop control. 2Multi Protocols Supported: The module supports for PPS PD3.0 PD2.0, for QC4+ QC4 QC3.0 QC2.0, for AFC, for PE2.0 PE1.1, for SFPP, for vooC input fast charging protocol, for FCP SCP and more. 35 Ports: The module has built in 5 USB interfaces in total, which are type A1, type A2, micro B, type C and for IOS interface, support different charging modes. 4Multi Function: The module is equipped with decryption function, 12bit ADC, coulomb meter accurate electricity metering. 5High Safety: With input overvoltage protection, output overcurrent, short circuit protection, charging timeout, overvoltage protection, temperature protection, the module is high reliable in use.
Package List:
1 x Mobile Charging Module
