Specification:
Item Type: Tattoo Power Supply
Power Supply Size: Approx. 8.5 x 15.5cm / 3.35 x 6.1in
Power Supply Shell Material: ABS
Supporting Base Material: Alloy
Input Voltage: AC100-240V1.5A
Frequency: 50-60HZ
Output Voltage Accuracy: 0.1V
Advantages: LCD, touch button, timing, 2 voltage modes, 12 preset voltages, can be used to shade or line.
Usage:
-
Press the power button for 3 seconds to start the power supply. Press the button for 3 seconds to shut down the power supply.
-
This machine provides two pedal modes, one is continuous output mode, the other is micromotion output mode. When selecting continuous output mode, long press the "L/S" button for 3 seconds. In this mode, there is no need to install the foot, short press to stop the power supply, and in micromotion mode, the foot can be installed to control;
-
Press the left middle time button to start timing, then press to pause, long press to reset. button to start the timing, then press pause, and long press reset
- Press the power/foot button in the lower right corner to adjust the foot to tap mode, that is, you can continue to supply power to the tattoo machine without stepping on the foot. Press the button to stop the power supply
- Long press the power/foot button in the lower right corner to shut down.
Features:
1LCD screen, with less power consumption, visual operation, high brightness and long visual distance. 2Touch experience, low energy consumption and sensitive control, enabling flexible tattoo operation. 3High quality master chip, comprehensive upgrade system, with powerful functions. 4Fixed base, using suction cup and magnet two ways to install and disassemble, make it is not easy to fall. 5The timing function starts with a touch and reset with a long press, especially suitable for tattoo artists who charge by the hour. 6With 12 sets of memory voltage, and can be set to adjust. Pedal has double modes, continuous pedal mode and micromotion mode.
Package List:
1 x Power Supply
1 x Supporting Base
1 x Adapter
1 x Plug
1 x Bag of Silicone Supporting Base Accessories (4 x Silicone Suckers, 4 x Screw Shims, 4 x Screw Caps)
1 x Magnetic Supporting Base Accessories (4 x Magnetic Suction Base, 4 x Screw Shims, 4 x Screw Caps, 1 x Cross Screw)