Specification:
Item Type: Tattoo Machine Pen Set
Material: Aluminum Alloy, PP
Power Supply Battery: 2 x 1400mAh Lithium Battery
Plug: US Plug 100-240V-0.8A 50/60Hz
Tattoo Machine Type: Motor machine
Motor Type: Coreless motor
Function: Liner and shader
Tattoo Pen Length: Approx. 152mm / 5.98in
Tattoo Pen Diameter: Approx. 25mm / 0.98in
Power Supply Length: Approx. 58mm / 2.28in
Power Supply Width: Approx. 34mm / 1.34in
Power Supply Height: Approx. 24mm / 0.94in
Foot Pedal Diameter: Approx. 105mm / 4.13in
Foot Pedal Height: Approx. 23mm / 0.91in
Tattoo Pen Base Length: Approx. 198mm / 7.8in
Tattoo Pen Base Width: Approx. 55mm / 2.17in
Tattoo Pen Base Height: Approx. 27mm / 1.06in
Power Charging Cable Length: Approx. 100cm / 39.37in
Foot Pedal Line Length: Approx. 180cm / 70.87in
Charging Interface: DC Interface
Power Supply Voltage Adjustable Range: 4.2-12V
Adjustment Accuracy: 0.3V
Charging Time: 3 hours
Use Time: About 5 hours
Suitable Needle: Apply to 99% of the tattoo cartridges needles on the market
Advantages: Dual power supply, wireless operation, complete accessories
Wireless Operation:
- Plug the wireless power into the tattoo pen and install the tattoo needle.
- Long press the switch button below the tattoo pen display for 3 seconds to start up, and the default startup is 7.2V.
- Press the "-" and "+" keys above the tattoo pen to adjust the voltage. The voltage adjustment range is 4.2-12V, and the single adjustment accuracy is 0.3V.
- If the machine needs to be suspended in the process of operation, press the power switch, and press it again to continue operation.
- In the process of operation, if the power supply is low or the power is used up, you can replace the power supply. When changing the battery, you need to shut down first.
-
After the operation, long press the switch key to shut down. After power off, unplug the power to charge, remove the tattoo needle, clean the machine and store it well.
Wired Operation (when the power supply has no power, it can be charged while operating):
-
Plug the power supply into the tattoo pen and install the tattoo needle.
- Connect the power supply to the charging cable and foot pedal, the two cables should be connected to the configured plug.
- Turn on the circuit and press the switch key below the tattoo pen display for 3 seconds to turn on the machine, which is 7.2V by default.
- Press the "-" and "+" keys above the tattoo pen to adjust the voltage. The voltage adjustment range is 4.2-12V, and the single adjustment accuracy is 0.3V.
- Step on the foot pedal continuously during the operation, the tattoo pen can continue to operate, release the foot pedal, the tattoo pen stops working, press the it again, the machine starts again.
- After the operation, long press the switch key to shut down. After power off, unplug the power to charge, remove the tattoo needle, clean the machine and store it well.
Features:
1Coreless Motor: Tattoo machine pen adopted coreless motor, with strong force, quickly start and good strength, will not flying needle or inkjet, provide good tattooing effect. 2Easy To Use: With LCD display screen, you can see real time power and voltage when you operating, and with power switch, voltage regulation key, which is easy and simple to use. 3Foot Pedal: Equipped with a round foot pedal, when the 2 power supplies are no electricity, or tattoo artist used to use the tattoo foot pedal, can also be wired operation, the foot pedal can control the power switch, plug can support the power supply and foot pedal. 4Dual Power Supply: Equip with 2 mini DC connector power supply, can be used interchangeably, light weight design to reduce the fatigue of the tattoo artist for a long time operation, while improving the work efficiency. Each power supply can be charged for 3 hours and work continuously for about 5 hours. 5Aluminum Alloy PP: Rotary tattoo machine pen made of high quality aluminum alloy material, strong and durable. Power supply shell, foot shell, tattoo pen holder made of high quality PP, which is lightweight and easy to use. The pen holder can prevent the tattoo pen from falling off or the tattoo ink of the needle tip from getting dirty on the table.
Package List:
1 x Tattoo Pen
2 x Power Supply
1 x Foot Pedal
1 x Plug
1 x Foot Pedal Connection Wire
1 x Power Supply Charging Wire
1 x Tattoo Pen Holder
