Specification:
Item Type: Cordless Tattoo Machine Pen
Material: Aluminum alloy, electronic components
Battery: Lithium Battery 1800mAh(Included)
Voltage: 4-12V
Adjustment Accuracy: 0.1V
Needle Stroke: 4mm / 0.16in
Tattoo Pen Size: Approx. 140 x 40mm / 5.51 x 1.57in
Speed: 12V 12000RPM
Suitable Needle: Most cartridges needles in the market
Charging Time: About 2.5 hours
Working Time: It can be used continuously for about 8 hours under 8V voltage
Display Contents: Current voltage, remaining power, operating duration
How To Use:
- Connect the battery compartment clockwise with the tattoo pen and adjust the length of the needle.
- The machine includes two modes:
Normal startup mode: Long press the power button to enter normal startup mode in shutdown state, then press the power button to start the machine, and then press the power button to stop the machine;
Enhanced startup mode: In shutdown state, double click the power button to enter the enhanced startup mode, the light sign appears, and then press the power button to start the machine, 0.2 seconds up to 10V and then down to the current setting voltage, and then press the power button to stop the machine.
- Power off: Long press the power button to power off the device when it is on, and there will be no button operation for 10 seconds. The brightness of the display screen will be reduced to save power. No output 5 minutes automatic shutdown, output no load 5 minutes automatic shutdown. When the power is less than 5%, the alarm is too low, and then shut down.
- Voltage adjustment: Click the + button to increase the voltage, 0.1V adjustment accuracy, long press the + button to quickly increase the voltage; Click - button to reduce the voltage, 0.1V decreases, long press - button to quickly reduce the voltage; Voltage range 4-12V.
- Charging: Plug in the Type C charging cable for charging. When charging, the display will prompt "Charging" and when it is finished, the display will prompt "Charge complete".
Features:
1Liner Shader: Tattoo machine pen adopted coreless motor, with 4 to 12V can be adjusted, 2.0A output, 12V voltage up to 12000RPM, which is suitable for both liner and shader. 2Long Endurance: Tattoo power supply pen built in 1800mah lithium battery, continuous work for 8 hours under 8V voltage, suitable for large area tattoo operation, without frequent replace battery. 3Display Screen: High resolution screen to display the current tattoo voltage, remaining battery and operation duration, which is convenient for tattoo artists to observe tattoo status at any time. 42 Modes: Accurate and fast voltage regulation, with 2 startup modes: normal startup and enhanced startup, which adapt to different application scenarios, with charging overvoltage protection. 5Comfortable Grip: Ergonomic tattoo machine pen imitating the grip and feel of real pen, long time use without tired, and compatible with most of the market tattoo cartridges needles.
Package List:
1 x Cordless Rotary Tattoo Pen
1 x USB Charging Line
1 x Manual
