Specification:
Item Type: Vacuum Cavitation Machine
Material: ABS
Operation Method:
I. Color Meridian Brush:
Method: After using the serum, use the probe to massage the specific part of the treated skin in a circle to adjust the output energy and mode of a total of M1, M2, M3, M4 four modes, as described below: "M1" continuous work, "M2" continuous work for 2 M2" works continuously for 2 seconds, with a pause of 2 seconds. "M3" continuous work for 1 second, pause for 1 second. "M4" continuous work 0.5 seconds, pause 0.5 seconds. The handle can be adjusted to 7 photon modes. First, turn on the switch on the machine screen, make sure the power supply is greater than 0, press "-" "+" to adjust the LED color.
1. Red:Activate suitable for any skin, promote blood circulation, regenerate collagen, make skin smooth, treat dry skin disorder, hair removal, degeneration and follicular disease.
2. Green: Balance normal sebaceous glands, reduce blackheads and sores, and balance moisture.
3. Blue: Calming for sensitive, oily and pimple skin, reduce and eliminate pimple bacteria, get rid of pimples, promote collagen and protein complex, revitalize skin, tighten loose skin and pregnancy wrinkles. 4. Purple: Drain water, renew skin, reduce wrinkles.
5. Orange: brighten and decompose pigments, smooth the skin.
6. Cyan: defense to enhance the ability to protect the skin, calming, release stress.
7. White: guide the skin to absorb nutrients, anti aging.
8. Circulation
2. 40KHz cavitation head: a collection of strong sound waves head, can be launched to the body 40KHZ strong sound waves, violent impact on fat cells, causing frictional movement between fat cells. This may cause the heat and water in the fat cells to be effectively consumed, making the fat cells smaller. Moreover, the acoustic wave vibration may cause a violent shock to explode the fat cells instantly, reducing the number of fat cells and thus achieving the effect of fat removal.
M1, M2, M3, M4 four modes, respectively: "M1" continuous work for 3 seconds, not continuous work for 3 seconds. "M2" continuous work for 2 seconds, intermittent work for 2 seconds. "M3" continuous work for 1 second, intermittent work I seconds. "M4" works continuously for 0.5 seconds and intermittently for 0.5 seconds. Operate with 40KHz cavitation head for 15-20 minutes, mainly spiral movement on the body.
Press "-" "+" to adjust the operation duration. Touch to adjust the cavitation mode in M1,M2,M3,M4 mode. Touch "-" to decrease the strength, touch "+" to increase the strength. Press the "Start" button to start the strong sonic burst fat head.
Method: After applying the slimming cream for about 15 ~ 20 minutes, use the probe to massage in a circular motion on the specific part of the skin being treated. Can accelerate the blood flow of the skin in the treatment area, with the effect of decomposition of fat.
Caution:1. Apply slimming cream or cooling gel to the skin area to be treated before treatment.2. Keep the probe in close contact with the skin.3. Adjust the strength from low level to high gear.4. Do not put the applicator in the same place.5. Move the applicator slowly but constantly.6. Avoid treating bones and do not target joints directly.7. Pay attention to the temperature of the cavitation handle when using Stop using for ten minutes after half an hour of use. 8. Cavitation is strictly forbidden without glue operation.
3. 4 Pole Radio Frequency Head
Press the "FACE RF" on the display to select the surface RF output, set the RF mode: touch can be adjusted in automatic, M1, M2, M3 mode RF mode. Automatic mode always output, M1 output 0.5 seconds, M2 output 1 second, M3 output 1.5 seconds, select the appropriate strength (according to customer acceptable level adjustment, recommended 20%-60%), press "START" key to start operation. Operation with facial RF head massage 15-20 minutes, with facial spiral movement mainly around the eyes.
Note: 1. apply gel or serum evenly on the treatment area. 2. keep the probe in close contact with the skin. 3. adjust the strength from low to high level. 4. do not put the applicator in the same place. 5. move the applicator slowly, but constantly. 6. the skin around the eyes and forehead is very sensitive, the RF output strength should be kept at a relatively low level. 7. if you need to rest during the treatment, please "pause" first and then press "START" to start the operation. 8. Please first "pause" and then "stop" to avoid excessive output of the machine.
4. Tripolar Radio Frequency Head:
Press the "eye RF handle" on the display to select the RF output, set the RF mode: touch can be adjusted between Auto, M1, M2, M3 mode RF mode, Auto mode always output, M1 output 0.5 seconds, M2 output 1 second, M3 output 1.5 seconds, the gel evenly coated in the treatment area. Select the appropriate strength (can be adjusted according to customer requirements) acceptable level, recommended 20%-60%), press the "START" button to start the operation.
Note: 1. Apply the gel or serum evenly on the treatment area. 2. Keep the probe in close contact with the skin. 3. Adjust the strength from low level to high level. 4. Please first "pause" and then "stop" to avoid excessive output of the machine.
5. Six Pole Radio Frequency Head:
Press the "body RF" on the display to select the surface RF output, set the RF mode: touch can be adjusted in automatic, M1, M2, M3 mode RF mode. Automatic mode always output, M1 output 0.5 seconds, M2 output 1 second, M3 output 1.5 seconds, select the appropriate strength (according to customer acceptable level adjustment, recommended 20%-60%), press "START" key to start operation. Operation with facial RF head massage 15-20 minutes, with facial spiral movement mainly around the eyes.
Note: 1. apply gel or serum evenly on the treatment area. 2. keep the probe in close contact with the skin. 3. adjust the strength from low to high level. 4. do not put the applicator in the same place. 5. move the applicator slowly, but constantly. 6. the skin around the eyes and forehead is very sensitive, the RF output strength should be kept at a relatively low level. 7. if you need to rest during the treatment, please "pause" first and then press "START" to start the operation. 8. Please "pause" first and then "stop" to avoid excessive output of the machine.
7. The Laser Board:
Press "Laser" on the display to select the laser lipolysis output, press "-" "+" to adjust the operating time. Touch to adjust the laser mode between M1,M2,M3,M4 mode. Touch "-" to decrease the strength, touch "+" to increase the strength. Press "START" to start laser lipolysis. M1, M2, M3, M4, as follows: "M1" works continuously, "M2" works continuously for 0.5 seconds and pause for 0.5 seconds. "M3" works continuously for 0.2 seconds, with a 0.2 second pause. "M4" works continuously for 0.1 seconds, with 0.1 seconds pause.
Method:The laser plate is tied to the desired area after treatment with the laser for 20 minutes. It accelerates the blood circulation of the skin in the treated area and has the effect of decomposing fat.
Caution:1. Please do not use colored light to directly radiate the eye
8. Cold Hammer:
- help skin tighten, maintain elasticity and prevent allergies and other problems;
- shrink pores, lock water, reduce wrinkles;
Press the "COLD handle" on the display to select the COLD output, according to the customer's, acceptable level), and then press the "start" button or press the switch on the treatment head, the light is on, start working
- Microcurrent Patch:
Microcurrent muscle stimulator which is a non-invasive weight loss treatment technology that can burn fat during exercise. Like every 2 to 3 weeks, in 4 to 6 treatments, in 30 minutes to complete 20,000 sit-ups or squats, the average fat loss and muscle gain. The treatment area includes the abdomen, buttocks, arms and thighs. Method:Connect the electrode patch (regardless of positive or negative), use the band to tie the electrode patch to the treatment area, adjust the output energy and mode. Mode M1, M2, M3, M4 four, respectively, described as follows: "M1" continuous work, "M2" continuous work for 2 seconds, pause 2 seconds. "M3" continuous work for 1 second, pause for 1 second. "M4" continuous work 0.5 seconds, pause 0.5 seconds.
Precautions 1. Microcurrent electrotherapy is prohibited for people with heart disease and those who have had heart surgery. 2. It is prohibited to put electrotherapy patches around the heart. 3. When the skin is very dry and the conductivity is poor, you can apply some water on the skin. Do not exceed 30 minutes at a time. 4. Stop using immediately if you feel uncomfortable after use
Features:
1FAT REDUCTION: Strong force explosion fat and fat removal strong sound wave explosion fat head with collective strong sound wave head, strong sound wave may be emitted to human body for impacting fat cells fiercely and causing friction motion between fat cells. This may cause effective consumption of calories and moisture in fat cells and reduce the size of fat cells. 2RF: Dissolve fat, lymphatic drainage, firm skin and enhance skin elasticity negative pressure RF liposuction head Being integrated with the most advanced RF technology and radio frequency, the Instrument may directly reach the deep seated fat body and have the excellence of targeted positioning RF. 3ICE THERAPY: Ice cooling analgesia, shrink pores, can effectively prevent the continued rupture of capillaries, ice to make local vasoconstriction, inhibit the inflammatory response. 4MULTI PART USE: Firm the arms, legs, thighs, buttocks, waist, abdominal muscles and reshape the body figure. Recommended to use with gel for better results. 5EASY TO OPERATE: Clear touch screen, clear parameters, optimized interface, easy to operate. Different modes and times can be adjusted by touch screen operation.
Package List:
1 x Host
1 x 4 Pole RF Head
1 x Tripolar RF Head
1 x 6 Pole RF Head
1 x Vacuum RF Head
1 x 40KHz Cavitation Head
1 x Ice Hammer Head
6 x Large Lipo Laser
2 x Small Lipo Laser
1 x Color Light Meridian Brush
1 x Pair of Microcurrent Patch
1 x Instruction Manual
1 x Handle Holder
1 x Large Lipo Laser Holder
1 x Small Lipo Laser Holder
1 x Plug
10 x Fixing Strap
