Specification:
Condition: 100% Brand New
Item Type: Headlight
Material: ABS
Color: As Pictures Shown
Rated Power: 100W
Color Temperature: 6000K white light
Model: H1
Luminous Flux: 4800LM
Installation Steps:
- Turn off the power on both sides of the vehicle, and wait for the lights and engine to cool down completely.
- Open the car engine hood and remove the left and right headlight buses. If there is enough installation space, you can remove the headlights.
- Remove the vehicle socket and the original headlight bulb.
- Connect the bulb lead to the ballast to ensure a reliable connection.
- Connect the power cord of the ballast to the original lamp socket, and check whether the red and black wires are connected properly.
- Fix the safety device in the engine compartment with double-sided adhesive fixing screw lights, and then fix the wire group with cable ties.
- Turn on the power, test the lights, turn off the power, straighten the wires, repeat the inspection once, and then drive the headlights.
Features:
1The product has a long service life and can reach the same life as the car. 2The required power is low, which greatly reduces the load on the car's power system, improved vehicle performance, and saves at least 40% of power consumption. 3Ultra-high brightness, 300% brightness increase, brighter, wider and farther. 4Suitable for all types of cars, including all Chinese cars, European, American and Japanese cars. 5Easy to install, just connect the lamp head to the original light source, fix the high voltage package, and connect the power cord, without changing the original parts of the vehicle. 6In the event of an accident, the sensing circuit in the high voltage package can immediately cut off the high voltage electricity to protect personnel. The highly insulated wires and the design against electromagnetic interference are very safe.
Package List:
2 x Headlight
2 x Ballast
1 x Power Wiring Harness
