Specification:
Item Type: Diaphragm pump
Working Voltage: 12V
Maximum Flow: 1.3GPM
Stop Pressure: 100PSI
Default Water Inlet and Outlet Connector: 3/8in Hose Connector
Pressure Protection: Power off Protection of Pressure Switch
Maximum Temperature Withstood: 140F (60C)
Suction Lift: 6 Feet (1.8 Meters)
Working Mode: Intermittent Working (Different Continuous Working Time Under Different Working Pressure)
Fitment:
Diaphragm pump is applicable to pressurized water supply for motorhomes and yachts, electric spray, cleaning machines, heaters, drinking fountains, medical equipment, distillation equipment, conventional industrial support, and any other pressurization system.
Note:
- The pump can be installed in any position. If installed vertically, the pump head should be in the downward position to avoid leakage into the motor housing in case of failure.
- The air inlet hose must be at least a reinforced hose with an inner diameter of 3/8in (10mm). The main distribution pipeline at the pump outlet shall also have an internal diameter of 3/8in (10mm), and the internal diameter from the branch and independent supply pipeline to the outlet shall not be less than 3/8in (10mm).
- After installation, check the voltage of pump motor. Check the voltage when the pump is running. The pump motor must always be supplied with full voltage.
- Do not apply inlet pressure exceeding 30 PSI. In general, try to avoid any inlet pressure.
- Connect the system with high pressure (twice the pump rating) and braided flexible pipes to minimize vibration and noise.
Features:
1Fitment: Diaphragm pump is applicable to pressurized water supply for motorhomes and yachts, electric spray, cleaning machines, heaters, drinking fountains, medical equipment, distillation equipment, conventional industrial support, and any other pressurization system. 2Excellent Performance: The internal diaphragm of this diaphragm pump is made from TPV, and the valve is made from EPDM rubber, which greatly improves the working efficiency and stability. The diaphragm pump runs at a constant speed with low noise, providing with a quiet experience environment. 3Practical Operation: The diaphragm pump is a 12V DC pressure diaphragm pump, which can absorb and discharge liquid by changing the volume depending on the back and forth agitation of the internal diaphragm, and has a self priming function. 4Economical and Durable: Some products provide heat supply protection and backflow protection at the same time, providing more protection time for the pump, greatly reducing the later maintenance cost. 5Warm Note: The diaphragm pump cannot be used to pump gasoline, oil or other liquids with a burning point below 100 degrees Fahrenheit (38 ), and the pump should be installed in a dry and ventilated place close to the water source.
Package List:
1 x Diaphragm pump
1 x Instructions