Specification:
Item Type: Bilge Water Pump
Material: Plastic, copper motor
Rated Voltage: 12V
Power: 120W
Current: 10A
Fuse: 15A
Head: Approx. 8.5m/27.89ft
Caliber: Approx. 25mm/0.98in
Wire Length: Approx. 3.3m/10.83ft
Speed: 7000 rpm
Wiring: Brown wire connected to positive pole, black wire connected to negative pole
Application: Used for boats, yachts, fishing boats, etc. as water pumps, bilge pumps, drainage pumps
Installation:
- Remove the filter from the bottom of the pump by pressing down on the lock tabs on both sides of the pump.
- Determine the suitable installation location for the pump
- Place the filter so that the pump outlet nozzle is in the correct position to connect the outlet hose
- Install the filter
- Install the pump on the filter so that the two lock tabs snap into place.
- Connect the outlet hose to the water spout of the pump (flexible hose is recommended)
- Install accessories
- Wiring: To prevent electrolysis and corrosion of wiring, all wire ends and terminals must be located above the highest water level, fixed with insulating nails or cable ties
Features:
1Wide Application: The bilge water pump is applicable for boats, yachts, fishing boats, etc. can be used as water pumps, bilge pumps, drainage pumps. 2High Flow: This bilge pump has a large flow rate, low power consumption and high lift, which can be used for large ships to pump seawater. 3Parameter: The rated voltage is 12V, the power is 120W, the current is 10A, with 15A fuse, 3.3m of wire length, 7000 rpm speed, with high performance. 4High Conductivity: The bilge pump housing is made of plastic, built in all copper motor which has excellent electrical conductivity, ensure high work efficiency. 5Easy to Install: Stringently manufactured to meet the original standard, perfect replacement for the old or broken one, improving the time efficiency.
Package List:
1 x Bilge Water Pump
1 x Manual
