Specification:
Item Type: ECU Programmer
Material: ABS, metal
Plug: US Plug 100-240V
Auto Version:
Car OBD, Truck OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear
Compatible Operating Systems:
for Windows 7
for Windows 8/8.1
for Windows 10
for Windows 11
Minimum Recommended Requirements: CPU > 2.5 GHz (Intel i5, i7)
Function: Read and write ECU data, read data in encrypted format, data can be modified after the data is unlocked by the super master, but the unmodified encrypted data can be used as written back, and can be used as ECU clone, but cannot be used as ECU service .
Features:
NEW AUTOMATIC FUNCTION: TRICORE CLONE
Added automation to clone the following control units with adaptation of the OTP zone and password:
- Replacement for Can-Am ME17.8.5
- for MED17.2
- Replacement for MERCEDES-BENZ EDC17 CP01
- Replacement for OPEL EDC17 C84
- Replacement for OPEL EDC17 C42
NEW AUTOMATIC FUNCTION: TRICORE CLONE
Added automation to clone the following control units with adaptation of the OTP zone and password:
- for MEVD17.2.8
- for MEVD17.2.H
- Replacement for FIAT DCU17 PC42
- Replacement for MERCEDES-BENZ EDC17 CP10
- Replacement for MERCEDES DCU17 PC42
- for MEVD17.2.8
- for MEVD17.2.H
- for DCU17 PC42
- for EDC17 CP48
We have added new BOOT MODE (BAM) for complete management of control units on replacement for SCANIA:
- for CONTINENTAL EMS S8
And new BOOT MODE (BAM) replacement for MERCEDES-BENZ / FCA with control units:
- for DELPHI CRD2.xx (SOLENOID and PIEZOTEC versions)
In this way the reading and writing work in open ECU mode is easier compared to the previous JTAG method (function still available).
Furthermore, with this method, for Delphi CRD2.xx SOLENOID it is no longer necessary to open the control unit from the bottom side.
- Micro + for Eeprom reading
- Micro + for Eeprom- Recovery- Checksum writing
New BOOT MODE (BAM) for CONTINENTAL GPEC ECUs
mounted on replacement for Fiat FCA, replacement for JEEP, replacement for Chrysler, replacement for Dodge cars:
- for CONTINENTAL GPEC2A
- for CONTINENTAL GPEC3
- for CONTINENTAL GPEC4
- for CONTINENTAL GPEC4LM
- Micro + for Eeprom reading
- Micro + for Eeprom writing
- Recovery
- Checksum
Features:
1ECU Programmer: Complete tool for reading and programming engine control units via OBD, the Boot mode and Jtag system, solution for the mechatronics. 2Function: Read and write ECU data, read data in encrypted format, data can be modified after the data is unlocked by the super master. 3Engine Communication: Allows serial communication with the Engine and Automatic transmission control units via the OBD diagnostic socket. 4Communication Mode: Could communication in BDM and JTAG, BOOT MODE, BENCH MODE (or Service mode) FULL SYSTEM via the OBD diagnostic socket. 5Wide Application: Professional software for reading and programming the control units of CAR, TRUCK, MOTORBIKE, TRACTOR, and BOAT.
Package List:
1 x ECU Programmer
1 x Breakout Box
4 x Wire Harness
1 x Power Supply
41 x Accessory
2 x Storage Box
