Specification:
Item Type: for Tech2 Flash Tester
Material: ABS
Update: Via 32MB Software Card
Year Coverage of Diagnosis: From 1992 to 2013, With Help of for Tis2000 Software, It Can Do Programming for Cars Before Year 2007
Notice:
- It Can Only Support 12V Cars, No Trucks
- One Device only Has One 32MB Card As Default
Description:
The for Vetronix Tech 2 comes with Authentic software and provides support for on boarddiagnostics on all systems 1992-2011.
Car Model Supported: Fits for SAAB
Specification:
1) Microprocessor: 32 bit,16 MHz
2) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
3) Communications: Integral RS232 communication port.
4) Screen: 3.8.8 backlit with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
Built in Card: 32MB PCMCIA card (included)
Features:
1Applicable Model: The engine fault code reader fits for SAAB, it can only support 12V cars, No trucks, one device only has one 32mb card as default. 2Year Coverage of Diagnosis: From 1992 to 2013, with help of for Tis2000 software, it can do programming for cars before year 2007. 3Perfect Configured: Removable hardware modules provide insurance against scan tool obsolescence. And equipped with large, easy to read backlit screen, could displays up to 9 vehicle parameters at once. 4Function: Capture stored DTCs, freeze frame, and failure record for later review, view status of diagnostic tests as they run, provide bi directional control when performing power train, chassis, and body diagnostics. 5Installation: RS232 RS485 ports provide the avenue to connect future devices to your Tech 2 Flash. The CAN diagnostic interface module connects between the diagnostic link cable and the OBD adapter.
Package List:
1 x Tester (With 32mb Pcmcia Card)
1 x Can Diagnostic Interface Module (With Manual)
1 x RS232 Cable
1 x RS232-DB9 Adapter
1 x DLC Cable
1 x DLC Loopback Adapter
1 x 12V Cigarette Lighter Power Cord
5 x Adapter Connector
1 x Battery Power Cord
1 x Connector Module
2 x Tis 2000 CD
