Specification:
Item Type: ECU Power Box
Material: ABS
Description:
Compatible in the automatic mode with the loading programs which use: BOOT-OEM12, 12 pin OBD-II; L-LINE, 15 pin OBD-II.
The Tool has built in current limiting resistors on the following signal lines:
RESET510 ;
BOOT510 ;
CNF1220 .
Lights:
Controls:
The tool has 3 Switches for operating in differentmodes.
POWER:
Power control. The tool has three modes of power supply to the ECU: OFF allows to remove all power and control signals from IDC-26 and DB-15 connectors; MANUAL supplies power to VECU and VKEY terminals and to the control outputs depending on the chosen tactics; AUTO, automatic control, in this mode power is controlled by the loading program with L-Line signal (15 pin OBD-II).
BOOT:
Simultaneous control of BOOT, RESET and CNF1 signals (3.3V): OFF, allows to remove all control signals from DB-15 connector; MANUAL pulls RESET and BOOT to the signal minus, and CNF1 to +3.3V; AUTO, automatic control,in this mode BOOT, RESET and CNF1 signals are simultaneously controlled by the loading program (12 pin OBD-II, OEM12).
GPT:
Dor for Renesas and for Tricore with GPT CPUs. It is necessary to use 5V while working with SH705x CPUs, in other cases 3.3V is to be used.
The Tool Is Fitted With Multipurpose Connectors Which Allow To Establish The Connections Flexibly:
USB:
Designed for connecting to the computer. It is to be connected when the built in USBUART converter is enabled;
DC:
For J2534 (OBD-II-F):
Designed for connecting the same name interface to OBD-II;
DB-15:
Designed for connecting to the main ECU connector. It is recommended to use14P600KT02, 14P600KT03 cables or analogous ones;
IDC-26:
Designed for connecting directly to the ECU board or via the adapter to the special head. It is recommended to use 14P600KT06 cable or an analogous one for Tricore GPT.
It is recommended to use Flash Development Toolkit software for flashing for Renesas CPUs.
Features:
1ECU Power Box: The tool is designed for connecting an ECU to multi device and provides power, BOOT and GPT control for operating in different modes. 2Automatic Mode: Compatible in the automatic mode with the loading programs which use BOOTOEM12, 12 pin OBDII; LLINE, 15 pin OBDII. 33 Switches: Box ECU Power Box has 3 switches, which can be operated in different modes for convenient control. 4Ease of Use: Support USB, DC, for J2543, DB15, IDC26 connection, which greatly reduces the difficulty of use and makes it easy for you to control. 5Parameter: Made od ABS material, has built in current limiting resistors, with VECU, VKEY LED, BOOT CNF1 LED lights indicator.
Package List:
1 x ECU Power Box
1 x Connector
2 x Wiring Cable
1 x Sticker
