Specification:
Item Type: Blind Spot Monitoring System
Material: ABS
Radar Frequency: 24ghz
Maximum Detection Distance: Approx. 20m/65.62ft
Detection Range Accuracy: Approx. 0.1m/0.33ft
Conventional Alarm Distance: 7-8m/22.97-26.25ft
System Alarm Accuracy: Approx. 0.1m/0.33ft
Waterproof Rating: IP67 waterproof
Warning Time: The Minimum Warning Response Time Is 0.75 Seconds
Working Voltage: 12V
Operating Frequency: 24ghz
Speed Range: -20m/S~20m/S, 72m/236.22ft
Working Temperature: -45~ 85C
Alarm Mode: First Level Alarm, The Yellow Light Is Always On, Second Level Alarm (Turn On The Turn Signal), The Red Light Flashes And The Buzzer Beeps To Remind
Different Objects Have Different Early Warning Distances
Blind Spot Monitoring 24ghz Radar, The Monitoring Distance Is 20m/65.62ft
The Warning Distances For Trucks, Cars, Electric Vehicles, And Pedestrians Are Different.
Truck Warning Distance Is: 0.3-10m/0.98-32.81ft
The Car Warning Distance Is: 0.3-8m/0.98-26.25ft
Pedestrian Warning Distance Is: 0.3-6m/0.98-19.69ft
Core Function 1: BSD blind spot monitoring
Warning strategies and trigger conditions
1. Warning Area: 10 meters on the left and right rear sides of vehicles in the adjacent lane
2. Trigger Condition: Boot start
3. Early Warning Strategy: The target enters the blind zone, and the warning light warns
(First level warning: yellow light) First level warning state, this car
Turn on the turn signal, and the buzzer alarms at the same time. (Level 2 Warning:
Flashing red light + beep beep code)
Core Function 2: Lane change warning
Warning strategies and trigger conditions
1. The vehicle is low speed, the target vehicle is high speed, and the relative speed is large
2. When the relative collision time between the target car and the vehicle is 5 seconds,
Start the LCA function
3. The target object with a relative speed of less than 1M/s is filtered.
4. The maximum warning distance is 50 meters
5. The warning light lights up for the first level alarm, the first level of early warning status
The lower turn signal is a secondary warning (the buzzer emits drops at the same time
Ticking alarm)
Core Function 3: EAF door opening warning
Warning strategies and trigger conditions
1. The first level warning function is similar to LCA, and the vehicle is close to the warning
(50m)
2. Under the first level alarm state, the car turns the signal and beeps
Simultaneous alarm (secondary warning)
Features:
1Intelligent: The system adopts adaptive signal processing and target recognition methods, only alarms moving targets with speeds greater than 20km/h. 2High Accuracy: The system adopts multi channel interference technology to accurately measure the distance, speed and angle of the target, and does not alarm the target outside the alarm area. 3Safety: When monitoring the blind spot, the moving targets in the blind zone, including approaching, following (the same speed as the car), and distant targets are alarmed to improve driving safety. 4Principle: When there is a moving target in the alarm area, the alarm indicator lights up, at this time, if the driver forces the turn signal to turn, the alarm indicator flashes and the alarm horn issues an alarm. 5Practical: Three core functions supported, with blind spot warning, lane change warning, door opening warning, simple installation, no need to connect to the OBD installation system.
Package List:
2 x BSD Radar
1 x Buzzer
2 x Prompter
4 x Bracket
8 x Screw Fitting
1 x Lamp Harness
1 x InstallationAuxiliary Card
3 x BSD Radar Harness
1 x Instruction Manual
