Specification:
Item Type: ECU Diagnostic Tool
Material: ABS
The ECU programmer IO Terminal combines K-line and CAN interfaces to provide ideal software compatibility
IO Terminal is a software and hardware solution designed to use OBD II datalink connectors with a large number of ECUs, automatic transmissions, BSI installed in vehicles such as, replacement for Mitsubishi, replacement for Mazda, replacement for Ford, replacement for Subaru, replacement for Suzuki, replacement for Opel, replacement for Alfa Romeo, replacement for Fiat, replacement for Jaguar, replacement for Land Rover, replacement for Lancia, replacement for Maserati, replacement for Hyundai, replacement for Kia, replacement for Daewoo, etc.
Advantage
The combination of K-line and CAN interface provides ideal software compatibility without the need to purchase expensive J2534 equipment Use diagnostic connector links to read and refresh flash and EEPROM memory images.
Checksum testing and correction. Safe reading and flashing
License
The software is marketed on a module basis. Each module is a separate program that runs independently via a joint adapter. You may only download and use software for which you have a license. The license is stored on a special card and inserted into a special adapter slot before the software is used. Some licenses can be recorded on a single card, while others need to be recorded separately.
Replacement for OPEL ecu license. All licenses will be activated in the future.
Basic package: MULTITOOL ,replacement for OPEL ECU LICENSE
MULTITOOL OPEL ECU readwrite OPEL ECU via CAN (OBD)
or wiring on the bench). The software also has a bootpin recovery mode.
Supported OPEL ECU types:
- E83 MPC5565 flash memory read and write. CAN (OBD) BOOTPIN recovery;
- E78 MPC5566 Flash ReadWrite. CAN (OBD) BOOTPIN recovery;
- E87 MPC5565 flash memory read and write. CAN (OBD) BOOTPIN recovery;
- E39 MPC5566 flash memory read and write. CAN (OBD) BOOTPIN recovery;
- E39A MPC5566 FLASH RW.CAN (OBD)BOOTPIN recovery;
- E98 MPC5674 FLASH RW.CAN (OBD)BOOTPIN recovery;
- For DELPHI DCM3.7AP MPC5566 FLASH RW.CAN (OBD);
- For DELPHI DCM3.7AP R5F72544 FLASH DATAFLASH RW.CAN (OBD);
- For DELPHI DCM3.7AP R5F72513 FLASH DATAFLASH RW.CAN (OBD)
- E37 M58BW016DB Flash ReadWrite.CAN (OBD);
- E38 AM29BDD160GB flash memory read and write.CAN (OBD);
- E92 MPC5674 FLASH RW.CAN (OBD)BOOTPIN recovery;
- E80 MPC5676 FLASH RW.CAN (OBD)BOOTPIN recovery;
- E82 MPC5676 FLASH RW.CAN (OBD)BOOTPIN recovery;
- E67 S29CD016 FLASH RW.CAN (OBD);
- (Replacement for BOSCH)E84MPC5676 FLASH RW.CAN (OBD);
- for EEPROM dump viewer, editor.
A full version of the replacement for Opel license, as follows:
BCM BSI types supported by MULTITOOL replacement for OPEL BCMS
Replacement for Opel Delphi BCM 70F3238 93C86 CAN . EEPROM 93C86 RW, Display PIN, Reset PIN. 70F3238 Flash readwrite;
Replacement for Opel Delphi BCM 70F3379 93C86 CAN . EEPROM 93C86 RW, Display PIN, Reset PIN. 70F3379 Flash readwrite;
Replacement for Opel Delphi BCM 70F3633 CAN. 70F3633 DATA & PROGRAM FLASH RW, display PIN, reset PIN;
Replacement for OPEL forBOSCH BCM 70F3469 24C16.70F3469 FLASH RW. EEPROM 24C16 RW Display PIN, reset, change odometer, change VIN;
Replacement for OPEL for BOSCH BCM 70F3385 24C16.70F3385 FLASH RW. EEPROM 24C16 RW Display PIN, reset, change odometer, change VIN;
Replacement for OPEL for BOSCH BCM 70F3558 24C32.70F3558 FLASH RW. EEPROM 24C32 RW Display PIN, reset, change odometer, change VIN;
Replacement for Opel Continental BCM 70F3469 95160(25160). 70F3469 Flash readwrite. EEPROM 95160(25160) RW Display PIN, reset, change odometer, change VIN;
Replacement for Opel Continental BCM 70F3558 95320(25320) .70F3558 Flash ReadWrite. EEPROM 95320(25320) RW Display PIN, reset, change odometer, change VIN.
MULTITOOL Replacement for OPEL TCM Read and Write OPEL TCM 6T30, 6T35, 6T40, 6T45, 6T50, 6T70, 6T75, 6T80, 6L45, 6L50, 6L80, 6L90 Via CAN (OBD or wired on bench).
Replacement for OPEL TCM types:
TCM 6T30, 6T35, 6T40, 6T45, 6T50 AM29BDD160GB All Flash ReadWrite. CAN (on-board diagnostic system); TCM 6T70, 6T75, 6T80, 6L45, 6L50, 6L80, 6L90
Complete M58BW016DB flash readwrite. Yes (On Board Diagnostic System).
MULTITOOL OPEL EPS readwrite OPEL EPS module via CAN (OBD or wired on bench).
Supported OPEL EPS types:
EPS for Bosch 70F3187 95080 70F3187 Flash memory read and write 95080 EEPROM read and write. Yes (On Board Diagnostic System).
Features:
1Multifunction: The tool is a multifunctional combined programming tool that supports replacement for Opel ECU, for TCM, BCM and EPS and other devices, and can be applied to various operating needs. 2Dual Communication Interface: Adopts K line and CAN communication interface, which can meet the programming needs of different types of equipment. 3Heavy Duty Made: Adopts quality BD9 connector, which has good connectivity and stability to ensure the smooth progress of the programming process. 4Online Programming: Supports online programming, which can be directly programmed in the device without offline processing, saving time and energy. 5Fine Workmanship: With strict testing and verification, has high reliability and stability, can meet different programming needs, and provide users with the best experience.
Package List:
1 x Charger Wiring Harness
1 x ECU Diagnostic Tool
1 x Cable
1 x K Line
1 x OBD Data Line
