Specification:
Item Type: DC Motor Controller
Material: Aluminum
OE: 1205M 5601, 1205M 5603
Operating Voltage: 48V
Current: 500A
Throttle Type: 0-5V
Applicable: For Curtis, can also be applied to forklifts, transport trucks and so on (such as the use of other vehicles need to be programmed)
Nominal Battery Voltage (Volt): 48V
1 minute current rating (amps): 500amps
5 minute current rating (amps): 350amps
1 hour rated current (amps): 200amps
Plug Brake (A2 Bus): Yes
PWM Operating Frequency: 15.6kHz
Electrical Isolation From Heat Sink (Minimum): 500 VAC
KSI Input Current (Without Contactor Engaged):
70 mA without programmer
130 mA with programmer
Logic input current: <2 mA
Status LED output current (maximum): < 2 mA
Ten throttle types are available for these controllers:
Type 0: 2-wire potentiometer, 0-5 k
Type 1: 2-wire potentiometer, 5k-0
Type 2: Single-ended 0-5V input
Type 3: 2-Wire Potentiometer, 4.6k-0
Type 4: 2-Wire Potentiometer, 5.5k-0
Type 5: 2-Wire Potentiometer, 1k-0
Type 6: ITS Input
Type 7: Single ended 6.3-10.6 V Inputs
Type 8: Single ended 6-12 V input
Type 9: Single ended 3 wire potentiometer, 0-5k
Operating ambient temperature range: -40 to 50
Storage ambient temperature range: -40 to 85
Features:
1Programmable Controller: Motor controller is designed to provide smooth, quiet, and efficient motor speed and torsion control. The addition of the ability to be programmed via the 13134331 handheld programmer or the 1314 PC programming station. In addition to configuration flexibility, the use of the programmer provides diagnostic and testing capabilities. 2Rugged Construction: The controller uses rugged anodized aluminum extruded shell that meets IP65 environmental sealing standards for use in harsh environments. Ideal solution for a variety of electric vehicle applications including industrial trucks, personnel carriers, material handling vehicles, golf carts and more. 3High Efficiency: High frequency switching and ultra low voltage drop enable high efficiency and quiet operation. Simple installation and wiring is achieved using push in connectors for control signals and plated solid copper buses for power connections. 4Wide Compatibility: Compatible with two wire potentiometers or voltage throttles. Throttle failsafe circuitry disables the controller if the throttle cable is open. If the key is turned on while the throttle is in use, the high pedal disable feature prevents the controller from operating. 5Safe to Use: Insert the brake diode inside the controller. Thermal protection and compensation circuits provide constant current limiting during the operating range as well as during under temperature, and over temperature cuts; there is no sudden power loss under any thermal conditions. Undervoltage cutout protects against low battery voltage, including low voltage caused by external loads.
Package List:
1 x DC Motor Controller