Specification:
Description:
If your central heating or irrigation sprinkler system isn't working correctly, it could be down to the solenoid valve. Repair a faulty valve with this 24V DC replacement which is suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
Features:
This is a normally close type electric solenoid valve, power on to open it and power off to close it.
Connect to DC 24V voltage and the suggested input current is more than 2A to ensure a stable performance.
The high quality brass valve body would hold a press up to 1Mpa and liquid temperature from -5 to 100.
Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water.
Better for intermittent short time work, single continuous power on time is better to be less than 30 minutes.
Specifications:
Valve Body: Brass
Input Voltage: DC24V
Input Current: >2A
Power: 16W
Type: NC(Normally Close)
Pressure: 0-1.0Mpa
Thread Size: 3/4" BSPP (DN20)
Flow Orifice: 20mm
Seal Material: NBR
Liquid Temperature: -5~100
Suitable for: Non-corrosive oil, water, gas, etc
Package Includes:
1 x Solenoid Valve
Features:
1This is a normally close type electric solenoid valve, power on to open it and power off to close it 2Connect to DC 24V voltage and the suggested input current is more than 2A to ensure a stable performance 3The high quality brass valve body would hold a press up to 1Mpa and liquid temperature from 5 to 100 4Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications 5This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water
Package List:
