Specification:
Features:
- The display interface adopts 2.4-inch TFT color LCD, which makes the operation more intuitive and convenient.
- The instrument USES direct digital frequency synthesizer (DDS) technology to provide stable, accurate, pure and low-distortion signals.
- Rich keyboard shortcuts and graphical user interface simplify each operation, easy to operate.
- Surface mount technology can improve anti - interference and service life.
- The instrument USES A 14-bit high D/A conversion chip (5Vpp output quantization error less than 1mV), A sampling rate of 250MSa/s, and A vertical resolution of 14bit.
- Various modulation types: AM, FM, PM, ASK, FSK and PSK modulation.
- Scanning function: four properties of the scannable signal, including frequency, amplitude, offset and duty cycle; It has two kinds of Linear and Logarithm scanning type; Scanning time: 0.01S-9999.99S; Up, down and round trip scanning directions.
- Function of 100M frequency meter: it can measure frequency, period, pulse width and duty ratio. The frequencies that work are 100MHz and Min. Frequency behavior: 0.01 Hz.
- Counter function: there are 2 coupling measurement modes, including DC coupling and AC coupling. This design can solve the inaccurate problem of ac coupling.
- Output short circuit protection: when the load short circuit, all channels can work for more than 60 seconds.
Specification:
Item Type: Signal Generator
Material: Plastic
Display: 2.4 inch, TFT Color Display
Save & Load:
Amount: 20
Position: 01 to 20 (01 for start default value)
Interface:
Type: USB to Serial interface
Protocol: Command line mode, providing communication protocols.
Communicating Speeds: 9600bps (Industrial standard)
Power:
Technic: SMD, LSI, Reliable and durable
Buzzer: Can be turned on/off by setting.
Operation: Buttons and knob continuously.
Environment: Temp: 0-40, Humidity: 80%
Size: Approx.200 x 190 x 90mm / 7.9 x 7.5 x 3.5in
Weight: Approx. 1078g / 38oz
Package List:
1 x Signal Generator
1 x USB Cable
1 x Power Cable
1 x BNC-BNC Cable
2 x BNC-Clip Cable
Features:
1The display interface adopts 2.4-inch TFT color LCD, which makes the operation more intuitive and convenient. 2The instrument USES direct digital frequency synthesizer (DDS) technology to provide stable, accurate, pure and low-distortion signals. 3Rich keyboard shortcuts and graphical user interface simplify each operation, easy to operate. 4Surface mount technology can improve anti - interference and service life. 5The instrument USES A 14-bit high D/A conversion chip (5Vpp output quantization error less than 1mV), A sampling rate of 250MSa/s, and A vertical resolution of 14bit.
Package List:
