Specification:
Item Type: Push-Pull Type DC Electromagnet
Suction: 25N
Product Model: JF-1040B
Stroke: Approx. 15mm / 0.6in
Current: 400mA
Product Weight: 137 g / 4.8 oz(approx.)
Operating Conditions:
- Operating Temperature: Between -5C and 40C solenoid valve will not solidify
- Operating Humidity: Relative humidity between 45% and 85% solenoid valve will not solidify
- Storage Temperature: Between -40C and 75C solenoid valve will not solidify
- Storage Humidity: Relative humidity between 0% and 95% solenoid valve will not solidify
Performance Requirements:
Temperature Rise: 65 or less (level A) Life: 1million cycles or more under load
Test Environment:
- Ambient Temperature: 232C
- Relative Humidity: 5010%
- Atmospheric Pressure: 1013MPa
- Insulation Resistance: When measuring with 500VDC insulation resistor, the insulation resistance between the coil and the yoke must be at least 100M.
- Insulation Strength: The insulation strength between the coil and the yoke should be at least 600VAC/1 minute.
Features:
1DC electromagnets are mainly used in vending machines, transportation equipment, office facilities, household appliances, machinery, etc. 2Easy installation with female thread mounting holes. 3Tinned copper wire, anti-oxidation, lower resistance. 4Low friction ensures high efficiency and long service life. 5Made of high quality electronic components, stable and reliable performance.
Package List:
1 x DC Electromagnet
