Specification:
Item Type:Ultrasonic Cleaner
Model: 360HT
Type: Mechanical Timing Heating
Inner Tank Capacity: 6.5L
Inner Groove Size: 300 x 155 x 150mm / 11.81 x 6.1 x 5.91in
Ultrasonic Frequency: 40KHz
Ultrasonic Power: 180W
Heating Power:300W
Number of Vibration Heads: 3
Working Time Range: 1-20Min
Temperature Range:0~80
Liner Material: SUS304 Stainless Steel
Shell Material: Stainless Steel
Basket: Equipped
Sound Reduction Cover: Equipped
Function:Glasses, rings, coins, jewelry, industrial parts, hardware tools, watches, dentures, surgical instruments, PCB boards.
Instruction:
- After unpacking, shake the machine slightly and listen to the sound in the chassis to confirm whether the parts are loose.
- Place the machine in a ventilated and dry place to ensure that the machine is in a horizontal position;
- Add an appropriate amount of cleaning solution (2/3 groove depth 5, adjust the ultrasonic working time:
After the power is turned on, the right digital screen displays after turning on the power, turn the right timer knob clockwise to reach the desired cleaning time on the 0 to 20 minute time dial. The indicator light is on and a "ZIZI" sound is emitted, indicating that the ultrasonic is running.
- Adjust the working temperature (select heating if necessary; mechanical type without heating):
Rotate the left temperature controller clockwise to the desired temperature (20 or more). The heating indicator lights up and the heating part starts to work.
- Shut down after completing work:
After the cleaning work is completed, if it is not necessary to operate, the heating part should be turned off immediately, and the power supply should be disconnected. After the cleaning liquid is cooled to normal temperature, the cleaning liquid is drained, and the inner tank and outer casing are wiped clean. The used machine should be placed dry. Ventilation to avoid moisture in the control circuit.
Q: What is an ultrasonic cleaner?
A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. Bubbles are small
Through to penetrate microscopic crevices, cleaning them thoroughly and consistently.
Q: Which products can I clean this model?
A: Many products can be cleaned. Common such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, razor heads, nibs, coins, badges, pacifiers, etc.
Q: Which builders can be properly added for better cleaning and cleaning during the cleaning process?
A: You can add cleaning liquid or detergent, such as: detergent, soapy water, disinfectant, etc., but do not add acidic or alkaline solution to the machine to prevent ABS corrosion damage.
Features:
1Ultrasonic working time from 0 to 20 minutes, heating temperature is up to 80 C, suitable for different occasions. 2Using premium adhesive technology, no tank piercing, no nail mark or falling off of tank. 3Use a safe and efficient transducer to improve the conversion efficiency and safety performance. 4The shell is made of high-quality anti-fingerprint stainless steel embossing board, which is beautiful and gorgeous. 5Cleaning tank with high quality stainless steel one-time stamping forming, no welding, waterproof performance is better. 6Uses the high quality component, the ultrasonic efficiency is high, the power is strong, the cleaning effect is good.
Package List:
1 x Cleaner
1 x English Users Manual
1 x Power Cord
