Specification:
Item Type: Motor
Material: Silicone wire + Japanese steel + copper
Model: 6354 190KV EPOWER motor (suitable for 63mm motor mount)
Maximum Power: 2450W
Maximum Current: 65A
Maximum Torsion: 7Nm
Motor Resistance: 0.053
Recommended ESC: 3-12S 50A (FSESC4.12 50A or FSESC 6.6 60A)
Weight: Approx. 0.56 kg / 1.2 lb
Motor Length: Approx.54mm / 2.1in
Motor Diameter: Approx. 63mm / 2.5in
Shaft: Diameter: Approx. 8mm / 0.3in, Length: Approx. 24mm / 0.9in
Keyway: Approx. 3 x 3 x 15mm / 0.1 x 0.1 x 0.6in.
Motor Wire: Approx. 130mm / 5.1in silicone 12AWG wire with approx. 4.0mm / 0.2in gold bullet male head.
Wire Configuration:
Blue = A
Black = B
Yellow = C
Brushless DC motor
Number of Poles: 14
Sensor Line: Standard RC sensor line JST-ZH 6-pin approx. 1.5mm / 0.1in pitch
Internal PCB with 120 degree Hall effect sensor.
The motor can be used with or without sensors. Sensorless operation is the most common.
VESC sensor cable required for VESC.
Wire Configuration:
Red = 5v
Blue = A
Yellow = C
Green = B
Black = GND
Stator: Laminated Japanese steel
12awg high-strand silicone cable with 4.0mm golden bullet connector.
Support both sensor and sensorless mode!
6354 190KV EPOWER motor (suitable for 63mm motor mount)
The screws used in the motor are M4 metric bolts. It is recommended to use our motor mount, using M4 hex socket bolts.
Screws for mounting the motor are not included with the motor.
The key for the keyway is included in the transport motor
Features:
1With strong power and longlasting battery life, highspeed operation, high temperature resistance, high power and high torsion. 2Using multistrand windings has better heat dissipation and avoids skin effect. Singlestrand winding will cause skin effect and generate heat, which is easy to be inefficient. 3Curved magnets on both sides increase the suction power, play an excellent mute effect, enhance the attractive force of the magnet, and improve the lasting quality. 4Convex magnet array can better match the work with the VESCfoc mode and greatly reduce the noise. The 42SH magnet is resistant to high temperatures of 115. 5The battle hardened epoxy resin is completely glued to the magnet, and the epoxy resin and balancing glue are used to maintain a good performance. 6Using Hall plate is tightly fixed on the stator, which is more firm and not easy to fall off, the long Hall wire is 12AWG, which is more heatresistant and has braided sleeves.
Package List:
1 x Motor
3 x Connector