Specification:
Item Type: Air Sander
Material: Stainless steel
Model: AT-1500H60
No-Load Speed: 15000 (rpm)
Product Size: Approx. 16.5 x 4.5 x 9.5cm/6.5 x 1.8 x 3.7in
Air Inlet Size: Approx. 0.6cm / 0.25in
Compressed Air Flow: 8CFM
Exhaust Direction: Rear exhaust
Air Connection Screw: 1/4-19NPT
Noise Value: Less than 83DB
Suggested Air Tube Inner Diameter: Approx. 6.3mm / 0.2in
Category: Oscillating Pneumatic Eccentric Sander
Refueling Tips:
- This machine is highly accurate. When it is running, the Speed is high. Once any fine sand or iron filings enter the movement, it may cause the blade to break and cause the machine to malfunction, so make sure that the air inlet is clean.
- Be sure to use an oil-water separator and drain regularly to make sure that the machine is dry.
-
Before use every day, be sure to add 3~5 drops of pneumatic oil to the air inlet of the machine, and connect the air pump to idle.
Need to Know for Exchange:
-
Locate the keyhole.
- Insert the positioning pin into the lock hole and keep the pin still.
- Turn right and replace the sand pad.
Features:
1Dedicated to all kinds of light and small metal dead corners, spray polishing, burrs, rust removal and detail trimming. 2Eccentric pneumatic grinder with 3MM yaw, strong force, can throw rough grinding work. 3With adjustable speed, the air flow can be changed to control the speed of grinding, polishing and waxing. 4There are 3 sizes x 6 kinds of automatic polishing pads to meet your different needs. 5Using high-quality materials, strong and durable, has a long service life.
Package List:
1 x Air Sander
3 x 1 Inch / 2 Inch / 3 Inch Polishing Disc
15 x 1 Inch / 2 Inch / 3 Inch Flat Sponge Pad
3 x 1 Inch / 2 Inch / 3 Inch Microfiber Mat
6 x 1 Inch / 2 Inch / 3 Inch Wool Pad
30 x 1 Inch / 2 Inch / 3 Inch Sandpaper
1 x Locating Lock
1 x 1/4 Air Inlet Connector
