Specification:
Item Type: Light Control Switch
Material: Plastic
Model: AS-22
Frequency: 50HZ
Output Current: 10A
Power Consumption: Incandescent lamp 1000W, energy-saving lamp/ fluorescent lamp/exhaust fan 400W
Installed Outdoors and on Light Poles:
A. The appearing side should face down to avoid rainwater intrusion
B. The photosensitive window of the controller should avoid direct sunlight
C. If the controller is installed on the driveway, the photosensitive window should not be opposed to the oncoming traffic, and the installation height should be higher to avoid the influence of the driving lights.
Working Principle:
The street lamp automatic switch is composed of a photoelectric conversion device, namely a photoelectric head and integrated blocks, electronic components, final control relay, and an AC contactor.
Wiring Method: The white wire shares the neutral wire, the white wire and the black wire are connected to the power supply, the white wire and the red wire are connected to the load
Features:
1Can be installed indoors or in a box, vertical installation is preferred. However, it is not suitable for places where the brightness of the outdoor environment is very dark or where strong light directly shines on the photosensitive window. 2The controller can control a single lamp or a group of lamps, but the total working current of the controlled lamp group must not exceed the rated current, otherwise the controller will be burned out. 3Low operating power, incandescent lamps are less than 1000W, energysaving lamps, fluorescent lamps, exhaust fans, etc. are less than 400W. 4Made of high quality plastic material, rugged, anticorrosion and durable to use, not easy to be damaged. 5Manufactured according to the original production specifications, in line with strict quality standards, long service life.
Package List:
2 x Light Control Switch
2 x Bracket
2 x Screw Accessory Pack
2 x Manual
