Specification:
Item Type: Wire Detector
Material: ABS
Transmitter: 125KHZ
External Voltage Recognition
Voltage Range: 12-400V
Frequency Range: 0-60HZ
Display: LCD
External Voltage Dielectric Strength: Maximum 400V AC/DC
Overvoltage Category: CAT III300V
Pollution Degree: 2
Automatic Shutdown: About 1 Hour (Without Any Operation)
Power Supply: 1 x 9V 6F22 Dry Battery (Battery Not Included)
Power Consumption: Maximum 18mA
Fuse: F0.5A 500V
Temperature Range (Operation): 0-40, Maximum Relative Humidity 80% (Non-Condensing)
Temperature Range (Storage): 20-60, Maximum Relative Humidity 80% (Non-Condensing)
Height above Reference Point: Up to 2000m
Receiver:
Positioning Depth: Positioning depth is related to media and usage
Route Search Mode:
About 0-2 Meters (Unipolar Application)
About 0-0.5 Meters (Bipolar Application)
Voltage Detection: About 0-0.4 Meters
Display: LCD display with function indication and histogram display
Power Supply: 1 x 9V 6F22 Dry Battery (Battery Not Included)
Consumption:
About 23mA (not including backlight or flashlight function)
About 35mA (including backlight)
Maximum 40mA (including backlight and flashlight function)
Automatic Shutdown: About 5 minutes (without any operation)
Fuse: F.05A 500V
Temperature Range (Operation): 0-40, Maximum Relative Humidity 80% (Non-Condensing)
Temperature Range (Storage): 20-60, Maximum Relative Humidity 80% (Non-Condensing)
How to Use:
- Install batteries on the transmitter and receiver (6F22 dry battery, not included in this product)
- Turn on the transmitter and receiver, plug in the test leads on the transmitter, connect the line to be tested, and press the transmitter button.
- If there is no problem with the line, the receiver will receive a buzzer sound.
- The receiver can individually touch the dew point body and press NCV to detect whether it is charged.
Features:
1Underground cable detector, sensitivity can be adjusted automatically or manually. 2Look for circuit interruptions and short circuits in wiring in wall and floor heating. 3Look for sockets and junction boxes that are inadvertently covered by grout. 4The receiver's display panel can display receiving level, transmission codes and dot voltage setting codes. 5The display panel of the transmitter can display the transmission level, transmission codes and external voltage.
Package List:
1 x Receiver (Battery Not Included)
1 x Transmitter (Battery Not Included)
2 x Clip
2 x Testing Cable
2 x Testing Pen
1 x Plastic Box
1 x Manual
