Specification:
Item Type: Weighing Transmitter
Operating Temperature: -30~60
Humidity: 10%RH 85%RH, non-condensing.
Storage Temperature: -40~85
Appearance Size: Approx. 120 x 180 x 46mm / 4.7 x 7.1 x 1.8in
Zero Adjustment Range: 50%FS
Working Temperature: -10~50
Output Fan Tail: 0~10V or 4-20mA
Linear Accuracy: 0.05%FS
Power Input: DC18-24V
Comprehensive Accuracy: 0.2%FS
Applicable Sensor Sensitivity: 1.0~3.0mV/V
How To Use:
Current Output Adjustment:
Take 4~20mA As An Example:
Step 1: Connect and check according to the wiring diagram;
Step 2: The load-bearing device is at no load, use an ammeter to measure the current output, and adjust the potentiometer marked "ZERO", that is, the zero point potentiometer, so that the current output is 4. 000mA.
Step 3: Increase The Load-bearing Device To Full Load (or A Certain intermediate load point: N%F. S), adjust the potentiometer marked "SPAN", which is the gain potentiometer, so that the current output is 20.000mA (or 4+n% x 16).
Step 4: Repeat steps 2 and 3 until the result is correct.
Take 0~10V As An Example:
Step 1: Connect and check according to the wiring diagram;
Step 4: Repeat steps 2 and 3 until the result is correct.
Features:
1This transmitter adopts a sealed enclosure with a protection level of IP67. 2The working temperature of the transmitter is 10~50, which is convenient and practical. 3This weight transmitter can be used in various industrial environments with strong adaptability. 4The signal output type of this weight senor transmitter can be 0~10V or 4-20mA. 5This transmitter is simple to use, small in size, easy to carry and store.
Package List:
1 x Weighing Transmitter
