Specification:
Item Type: Switch Power Supply
Material: ABS
Model: MDR-100-12
Output Type: Single output
Input Current: 1.3A
Rated Current: 7.5A
Current Range: 0-7.5A
Ripple: 120mV
Efficiency: 85%
Product Manual:
The MDR model is a DIN rail mounting power supply, which is fast and labor-saving, suitable for installation on DIN rail TS35 / 7.5 or 15. It is a low no-load standby loss model, with built-in active power factor correction function, DC OK signal output, convenient for external working condition display, 100 watt model also has an overheating protection function.
Main Feature:
No-load Loss: <1W (in line with new energy requirements)
Adopt ZCS/ZVS technology to reduce power loss
LED indicates working status
Comply with NEC class2/LPS standard
Natural ventilation cooling
DC OK signal relay contact output
100% full load burn-in test
Comply with environmental RoHS requirements
Overload Protection: When the overcurrent point is 105%150%, the constant current limit will automatically restore
Overheating Protection: 9010 (RTH2 detects the temperature of the power transistor heat sink)
Protection Type: Overheating shutdown, automatic recovery after temperature drops
Start up hold time 3000ms, 50ms, 50ms at 230VAC full load
Insulation Characteristics: Between Input And Output: 3KVac; Between Input And Shell: 1.5KVac; Between Output And Shell: 0.5KVac, 1 minute
Working Temperature: -10+60 (see output derating curve)
Vibration Resistance: 10500Hz, 2G 10 minutes/cycle, 60 minutes for each axis of XYZ
Safety Certification: Pass UL508, TUV EN60950-1, UL60950-1 certification, comply with NEC class2/LPS standard
Electromagnetic Compatibility Standards: Emission: EN55011, EN55022 (CISPR22), EN61204-3 Class B, Harmonics: EN61000-3-2, -3
Electromagnetic Compatibility Standards, Anti-interference: EN61000-4-2,3,4,5,6,8,11,ENV50204,ENV55024,EN61000-6-2,EN61204-3, Class A heavy industry standards
Mean Time Between Failures: 346,000 hours, MIL-HDBK-217F (25)
Wiring Mode: Input Terminal: 3 pins. Output Terminal: 6 pins screw DIN terminal
Size: Approx. 35mm / 1.4in
55mm / 2.2in
100mm / 3.9in
90mm / 3.5in
Features:
1With short circuit protection, overload protection, over voltage protection and overheat protection, it can effectively extend the service life of the product 2DIN rail mounting power supply, fast and laborsaving installation, suitable for installation on DIN rail TS35 / 7.5 or 15 3The product is a low noload standby loss model with builtin active power factor correction function 4There is a DC OK signal output, which is convenient for external working condition display 5High quality ABS material can make sure the durability and stability of the product
Package List:
1 x Power Supply
