Specification:
Item Type: Serial Port to WiFi Ethernet Device
Frequency Range: 2.412GHz-2.484GHz
Receiving Sensitivity: 802.11b: -89dBm 802.11g: -81dBm 802.11n: -71dBm
Main Frequency: 320MHz
FLASH Resources: 4MB
SDRAM Resources: 8MB
Operating System: For ECos
Interface Standard RS232: Immersion Gold Male DB9 Connector RS485/RS422: 5.08mm wiring terminal
RS232/RS422/RS485 can only choose one of the three types for communication
Speed: 10/100M
Protection Measures: Static Electricity: 8KV Contact Discharge, 15KV Air Discharge Surge: Differential mode 4KV, Common mode 6KV
Network Protocols: IP, TCP, UDP, DHCP, DNS, HTTP Server/Client, ARP, BOOTP, AutoIP, ICMP, Web socket, Telnet, uPNP, NTP
Security Protocol: TLS v1.2 AES 128Bit DES3
Standard: 802.11 b/g/n
Network Mode: STA/AP/STA+AP
Transmit Power: 802.11b: +20dBm(maximum) 802.11g: +18dBm(maximum) 802.11n: +15dBm(maximum)
Antenna Interface: 3dBi antenna
Number Of Ports: 1 x RJ45 LAN/WAN switchable
Data Bits: 8
Stop Bit: 1,2
Check Digit: None, Even, Odd
Baud Rate: TTL: 300 bps~230400bps
Flow Control: No flow control hardware RTS/CTS, DSR/DTR (RS232) software Xon/ Xoff flow control
Size: Approx. 95 x 65 x 25mm / 3.7 x 2.6 x 1in
Working Current: 200mA
Power Consumption: <700mW
Working Temperature: -25-85
Storage Temperature: -45-105, 5-95% RH(non-condensing water)
Features:
1Adopt MIPS MCU (8MB SRAM) and 4MB Flash, based on for eCos operating system 2Support remote virtual serial port, virtual TCP channel to connect to PLC, realize remote monitoring, support for TCP/UDP/Telnet protocol 3Support RS232/RS422/RS485 to WiFi/Ethernet data transmission, serial port rate up to 230400 bps 4Support wireless working STA/AP/AP+STA and routing/bridge mode network architecture 5Support webpage mode, webpage OTA wireless upgrade, PC software simple configuration and data TLS/AES/DES3 security encryption configuration
Package List:
1 x Module
1 x Interface
1 x Cable
1 x Charger
1 x English User Manual