Specification:
Item Type: DinRail Switching Power Supply
Material: Aluminum alloy
Model: NDR-120-12
DC Output Range: 12V, 010A
Ripple and Noise: 100mV
Voltage Adjustment Range: 2V: 1214V, 24V: 2428V, 48V: 4855V
Overload Protection: Constant current limit when the rated output power reaches 105%130%, and it will automatically recover after the load is normal
Overheating Protection: Overheating shutdown, automatic recovery after the temperature drops
Start-Up and Hold Time: 1200ms, 60ms at 230VAC full load, 2000ms, 60ms, 12ms at 60ms/115VAC full load
Insulation Characteristics: Between Input and Output: 3KVac, Between Input and Shell: 2KVac, Between Output and Shell: 0.5KVac, 1 minute
Working Temperature: -20+70 (see output derating curve)
Vibration Resistance: 10500Hz, 2G 10 minutes/cycle, XYZ axes each 60 minutes; installation conforms to IEC60068-2-6
Safety Certification: Passed UL508, TUV EN60950-1 certification
Electromagnetic Compatibility Standards: Emission: EN55022 (CISPR22), EN61204-3, Class B, Harmonics: EN61000-3-2, -3
Electromagnetic Compatibility Standards: Anti-interference: EN61000-4-2,3,4,5,6,8,11, ENV55024, EN61000-6-2 (EN50082-2), EN61204-3, Class A heavy industry standard
Mean Time Between Failures: 456,300 hours, MIL-HDBK-217F (25)
Wiring Mode: Input End: 3 Points. Output End: 4 points screw DIN terminal
Chassis Number: 992D
How to Use:
- Before using the power supply, please confirm whether the ground wire is properly connected, and mark the position of the specific power ground wire in the figure.
- The power supply must be placed in a well-ventilated place before and after use.
- The determination of the output current of the rail power supply is closely related to the environment. It is determined based on the rated standard current of the rail power supply provided by the equipment or the average current value measured by a multimeter. And in the case of high ambient temperature, poor air flow conditions, and excessive inductive loads, 20-30% more current margin must be prepared.
Size: Approx. 113.5mm / 4.5in
39mm / 1.5in
40mm / 1.6in
125. 2mm / 4.9in
35mm / 1.4in
Features:
1This switching power supply adopt global universal full range AC input voltage of 100240VAC, very practical 2Switching power supply driver can be installed on DIN rail TS35/7.5 or 15, very convenient 3The product possess short circuit protection/overload protection/overvoltage protection/overheat protection 4Comply with environmental RoHS requirements, very reliable, you can use with confidence 5Excellent aluminum alloy material, possess light weight, have good strength and corrosion resistance
Package List:
1 x DinRail Switching Power Supply
