Specification:
Item Type: Auto Start Genset Controller
Material: ABS
DC Power Supply: 8-35V
Power Generation Input: Single-phase AC10~400v 50 or 60Hz
Five Input Ports: 5A current, DC power supply B+relay output
Three Switch Input Ports: Connect to B- effective
Power Consumption: Standby (12: 0.3w, 24v: 0.4w)
Normal Work: (12v: 2w, 24v: 1.1w)
Working Environment: Temperature: -30~+70
Humidity: 20~95%
Purpose: Gasoline and diesel generator set control
How to Use:
The module can work in three working states: shutdown, manual startup, selfmotion.
Wiring:
Terminal 1 (B) is connected to the negative building that starts the battery.
Terminal 2 (B+): the positive pole of the outer core starting battery.
Terminal 4 (Fuel Output): Fuel output port (B+), external fuel junction device, contact capacity 5A.
Terminal 5 (Start Output): Start output port (B+), externally connected to the starter, with a contact capacity of 5A.
Terminal 6 (Remote Start Input): remote start input port, connect to B effective,
Terminal 8 (LOP Input), the low oil pressure switch signal input port, connect to B valid.
Terminal 9 (HWT.Input): water temperature/cylinder temperature separation switch input port, connected to B valid.
Terminal 10 (Configurable Output3), programmable output port (B+), contact capacity 5A, output switch can be set by computer.
Terminal 11 (Configurable Output2), programmable output port (B+), contact capacity 5A.
Terminal 12 (Configurable Output1), programmable output port (B+), contact capacity 5A.
USB port: used for the controller to directly connect to the computer through the USB cable for parameter programming.
Features:
1Standard 67 x 67 hole, embedded installation, flameretardant ABS plastic shell, 32bit ARM microcontroller control, stable performance and easy operation. 2The hardware watchdog is designed to not crash, ensure smooth program execution. 3With USB communication interface, the controller can be directly connected to the computer via USB, and all configurable parameters can be set on the computer. 4Have 2 fixed relay output ports (fuel output, start output), 3 programmable output ports, can be set with functions such as public alarm output, preheat output, idle speed control, shutdown output, etc. 5With protection and indications such as low oil pressure, high water temperature/cylinder temperature, overspeed, emergency stop, start failure, etc. 6Have a charging generator excitation function, idling speed control and energized shutdown function, the speed signal is taken from the generating frequency, and the panel LED displays various operation and alarm status.
Package List:
1 x Auto Start Genset Controller
2 x Fixed Clip
1 x USB Power Cord
1 x User Manual
