Specification:
Item Type: Time Switch
Material: ABS Shell
Model: TM-ST7
Contact Capacity: AC220-240V 16A 50/60Hz
Installation Type: DIN Rail
Standby Power Consumption: 0W
Glow Lamp Load: 50mA
Setting Range: 1-7 minutes
Minimum Setting Unit: 1 minute
Setting Time: 1 minute, 1.5 minutes, 2 minutes, 2.5 minutes, 3 minutes, 3.5 minutes, 4 minutes, 4.5 minutes, 5 minutes, 5.5 minutes, 6 minutes, 6.5 minutes, 7 minutes.
Connection Type: 3-/4-Conductor
Second Handover: After 30s
Contact Type: No Contact
Opening Width: Approx. >3mm / 0.1in
Switching Output: No Free Potential (230 V)
Incandescent Lamp/Halogen Lamp Load: 2300W
Fluorescent Lamp Load (conventional) Lead-Lag Circuit: 2300VA
Fluorescent Lamp Load (conventional) Parallel Correction: 1300VA 70 uF
Energy-Saving Lamp: 150W
LED Light <2W: 30W
LED Light 2-8W: 300W
LED Light8W: 300W
Fluorescent Lamp Load (electronic ballast): 600W
Fluorescent Lamp Load (conventional) Series Correction: 2300 VA
Switching Capacity: 6 A (at 230 V AC, cosine= 0.3), 16 A (at 230 V AC, cosine= 1)
Permanent Light Switch: Toggle Switch
Housing and Insulation Material: High temperature resistant, self-extinguishing thermoplastic.
Ambient Temperature: -10 ~ +50
Protection Class: II in accordance with EN 60730-1.
ProtectionType: IP 20
Maximum Length: Approx. 82 mm / 3.23 inches
Maximum Width: Approx. 65 mm/2.56 inches
Thickness: Approx. 17mm/0.67in
Features:
1The wide time setting range of this time control switch is from 1 minute to 7 minutes, very practical. 2The minimum setting unit is 1 minute, which enables accurate and convenient time switching setting. 3This timer switch can applied to various lamps, including incandescent lamp, halogen lamp, and so on. 4Can be re-triggerred, no closed-circuit current consumption, a toggle switch used for permanently lit. 5Both the installation and setting are very simple, not easy to be disturbed by the outside interference.
Package List:
1 x Time Switch