Specification:
Item Type: Air Cooled Spindle Motor
Spindle Parameters:
Idling Speed: 1000-12000RPM per minute
Peak Power: 500W
Peak Torsion: 0.5NM
Insulation Resistance: >2 Megohm
Insulation Dielectric Strength: 400V
Diameter: Approx.52mm / 2.0in
Length of Chuck Part: Approx.45mm / 1.78in
Diameter of the Chuck Part: Approx.16mm / 0.6in
Total Motor Length: Approx.190mm / 7.5in
Spindle radial runout 0.01-0.03 high accuracy
Can be used for solid wood PCB carving, drilling, etc
Detailed Technical Parameters of Speed Governor:
- Current Limit: 6A
- Adapted Motor Power: 50W500W
- Shape Size: Approx.130 x 100 x 51mm / 5.1 x 3.9 x 2.0in
-
Wiring Mode: Terminal Type (Convenient and quick)
Working Environment:
-
Surrounding Air Temperature: -1040
- The relative humidity of the air is below 85%, and the air is well ventilated
- Install in a place with good ventilation, no severe impact, no vibration, no explosive dangerous medium and no conductive metal particles
Features:
1The spindle motor adopt pulse width technology to make the speed more stable, with greater force at low speed 2With over current protection cut off device to make performance more reliable to meet your high requirements 3The spindle motor has soft start device to realize the effect that eliminating excessive motor starting current 4This spindle motor has quiet operation, small size and high speed, which strictly following industry standards and controlling quality 5Reinforced refrigeration fan at the end of the motor, so that you can work for a long time with confidence
Package List:
1 x Air Cooled Spindle Motor
1 x Speed Governor
1 x Spindle Fixture
4 x Mounting Screw
