Specification:
Item Type: Battery Power Supply Tester
Material: ABS
Model: DS Series
Functions: Capacity test, internal resistance test, connection to the host computer (3 functions)
Power Supply Mode: DC12V/2A
Constant Current Discharge Adjustment Range: 0.1-20A
Maximum Discharge Current Error: 0.01A
Maximum Discharge Power: 250W
Internal Resistance Range: 1mR-500mR
Overvoltage Protection OVP: Stop Working When >30V
Overcurrent Protection OCP: >20A Stop Working
Over Power Protection OPP: Stop Working When> 250W
Built In Over Temperature Protection OTP: Stop Working Above 75
How to Use:
Product Panel Button and Interface Introduction:
Front Panel:
- LCD Display
- [Knob] Function Knob (Support Left, Right, Confirm)
- [Reset] Reset/Return Button
- [On/Off] Start/Stop Button
- Current Positive Pole (Connect to the thick red wire)
-
Current Negative Pole (Connect with thick black wire)
Rear Panel:
-
Power Socket
- Expansion 11. Communication Interface
- External Temperature Probe Interface
- Cooling Port
LCD Display and Function Settings Introduction:
A. Main Interface Introduction
- Real time current/set current
- Running time (minutes)
- Start/Pause status sign
B. 5 Working Modes Introduction
(1) Constant Current Discharge Mode (CC)
Set constant current: Short press the [knob] to set the discharge current, and turn the [knob] to set the size. The device starts to display the measured current in real time, and the current can be modified during the discharge process.
C. Function Settings Introduction
- 5 working mode settings
(1). In the test interface, press the [knob] to set the parameters; long press the [knob] to enter the mode, and turn the [knob] to switch the discharge mode, as shown in the figure below
- Internal resistance setting
Short press the [knob] to enter the internal resistance test: test the internal resistance setting of the target battery, and turn the [knob] to set whether it is turned on.
- Restore factory settings
Features:
1[5 DISCHARGE MODES] Constant current discharge (CC), constant power discharge (CW), constant resistance discharge (CR), constant voltage discharge (CV) and dynamic load test (DS), meet various test requirements, test internal resistance of battery. 2[MULTIPLE FUNCTIONS] With capacity test, internal resistance test, connects to host computer, communicates with the computer through a USB cable, executes the software operation and real time parameters of the host computer, and queries historical curves. 3[HIGH SECURITY] 5 kinds of protection measures, namely reverse polarity protection, overvoltage protection, overcurrent protection, overpower protection, overtemperature protection, to ensure the safety of equipment. 4[POWER SUPPLY PERFORMANCE TEST] It can be used for current, power and aging tests of various DC power supplies. With LCD display, high measurement accuracy, small error, with power off memory function. 5[PERFORMANCE TEST OF VARIOUS BATTERIES] Widely used in the discharge and capacity test of nickel metal hydride batteries, nickel chromium, lithium battery cells, lead acid battery, ternary batteries (groups), etc.
Package List:
1 x Battery Capacity Tester
1 x Test Line (Red+Black)
1 x USB to Type C Port Cable
1 x Adapter
1 x Manual