Specification:
Item Type: Electric Diaphragm Pump
Mode: HV 30B
Material:
Pump Head: Nylon
Shell: Polypropylene
Diaphragm: TPU
Check Valve: Fluorinated Rubber
Check Valve Spring: Stainless Steel 316
Motor Rotation Shaft: Stainless Steel 316
Rated Power: 350W
Rated Flow Rate: 30L
Rated Head: Approx. 11m / 36.1ft
Maximum Operating Pressure: 70PSI
Medium Temperature: Less than or equal to 60
Motor Type: AC motor, permanent magnet motor
The characteristic of a pressure switch pump is to automatically start and stop the pump based on the opening and closing of the outlet.
For example, when a specific pressure is reached when the outlet is closed, the pressure switch will automatically shut off the pump motor. When the pressure drops, such as when the outlet is open, the pressure switch automatically starts the pump motor
The Pump is Equipped with Thermal Protection: Main circuit operation is considered a "continuous operation" application. When the maximum continuous working cycle is reached, the motor will arrive its maximum heat limit and must be at a low temperature (environment) before re running. Prolonged operation of the pump at or near the maximum heat limit will immediately result in the pump being unable to operate.
Features:
1APPLICABLE SCENARIO: A self priming pump with a power plug can be used in various scenarios, such as industrial pumping, chemical discharge, kitchen and household drainage, swimming and bathroom use, as well as agricultural irrigation. Industrial water pressure diaphragm pumps help you solve the problem of low water pressure. 2LIQUID NEED PURITY: The pump used in the IBC conveying system is not only designed for versatility. Ensure that the pumped liquid is pure and free from impurities, particles, and hard substances. 3EASY TO USE: Equipped with a pressure switch, which can automatically start and stop the pump without the need for manual operation. The pump can be controlled according to actual scenarios. 4STRONG ADAPTABILITY: Industrial electric water pressure pumps are suitable for various working conditions and industrial scenes, and can meet the working flow and head requirements of different needs, with a wide range of applications. 5EFFICIENT AND ENERGY SAVING: The industrial electric water pressure pump adopts an electric drive method, which does not require additional energy input and has the characteristics of good efficiency and energy saving.
Package List:
1 x Pump Body
4 x Interface
2 x Clamp
2 x Sealing Ring
4 x Accessories
1 x Battery Clamp Cable
1 x Manual
