Specification:
Item Type: Multifunction Detection Energy Meter
Model: SDM007
Material: PC
Measurement Accuracy:1%2 Word
AC Current: AC0-100A
Electricity Power: 0.000-99999kwh
Power Frequency: 45-65HZ
Measurement Speed: 2 x/s
Pressing Method: DIN Rail Type
Working Temperature: -10-+60 140
Working Humidity: 10-80% ( Without Condensation )
Working Air Pressure: 80-106kPa
Operating Instructions:
- Wiring the built in transformer according to the wiring diagram, the measurement circuit wire through the round hole below the meter, the direction of the wire penetration user can choose according to the use of the situation, you can penetrate the round hole from the bottom of the meter to the top out, or from the top of the meter to the bottom out of the round hole, penetration direction is not the same will not affect the measurement results.
- Press the button (SAM CK) on the right side of the meter panel, the three display functions will be converted to power factor (cos), time accumulation (h), and electric power (kwh), and the green LED indicator on the right side of the corresponding display window will light up to indicate the corresponding display function.
Features:
1One Touch Data Switching: This meter can display the measured AC voltage, current, accumulated time and frequency. The red and green LEDs help you to get the numbers easily. When the SAM CK key is pressed, the meter will change the display and the corresponding red LED will light up. 21% Measurement Accuracy: This single phase energy meter is safe to use with excellent PC flame retardant material and accurate chip. The accuracy is 1%2 digits, and the measurement speed is twice per second. 3Simultaneous Display Of AC Voltage And Current: DIN rail AC voltage and current meters can display AC voltage and current simultaneously. For currents below 100A, simply pass the wire through the hole on the right side of the meter to obtain the AC current. 4Data Storage And Zeroing: While the meter is displaying electrical energy, you press and hold the SAM CK key for 5 seconds and the meter will reset. The meter will automatically save the electric energy value and the accumulated time electric energy value when the power is disconnected, and the meter will continue to accumulate data when the measurement power is turned on again. 5Wide Application: This AC power meter rail with built in transformer can meet the maximum load current of 100A. It can be used in schools, shopping malls, homes, industries, laboratories, etc.
Package List:
1 x Multifunction Detection Energy Meter
1 x Manual
