Specification:
Item Type: 3D Printer Motherboard Kit
Material: PCB
Main Board Parameters:
Model: for MKSDLC32
MCU: ESP32 WROOM 32U (32 Bit)
MCU Frequency: 240MHz
Flash Memory: 8192K Bytes
Memory: 520K Bytes
Laser Speed: 8000mm/min
Offline Display: for MKS TS24 R, TS35 R
Firmware: for GRBL
Serial Port Driver: USB
Axes WIFI Onboard: 4(X, Y1, Y2, Z)
Web Site: Support
APP: Support
Storage Card: Support
MKS Laser Tool: Support
Available Machine: CNC Laser Engraving Machine
Stepper Driver: A4988, DRV8825, TMC2208, 2209, 2225(for Nema17 Motor)
Additional Driver: TB6600, TMC2160(for Nema23 motor)
Laser: Less Than 20W (>20W, External Power Supply)
Compatible Software: for LaserGrbl, for Xloader, for GrblController, for Benbox, for MDraw, for LightBurn
Main Board Introduction: for MKS DLC32 motherboard is a special desktop engraving machine developed for offline engraving main control board. The hardware is equipped with 32 bit high speed ESP32 module, integrated WIFI function, directly drive 2.4 or 3.5 inch touch color screen and can achieve fast engraving and web control, cell phone APP control, etc. for MKS DLC32 mounting holes and board size is compatible with for MKS DLC, and can also be used with for GRBLaser and for LightBurn PC software.
Display Parameters:
Model: TS24 R V2.1
External Size: Approx. 80 x 50mm/3.15 x 1.97in
Color Touch Screen: 2.4 Inch Touch Screen
Microprocessor: 32 Bit STM32 Processor
Update Method: SD File Update
Support Storage System: Storage Card
Support File Format: Gcode
Expandable Modules: WIFI Module, Power Failure Relay Module, Material Break Detection Switches, External Card Slot.
A4988 Driver Introduction: A4988 is a complete micro stepper motor driver with built in converter for easy operation. It can run bipolar stepper motors in full, half, 1/4, 1/8 and 1/16 step modes with output drive capability up to 35 V and2 A. The A4988 includes a fixed off time current regulator, which is in slow or mixed decay mode. The A4988 converter is the key to easy implementation. The "stepper" input drives the motor one microstep forward with a single pulse input. There are no phase sequencing tables, high frequency control lines or complex programming interfaces. The A4988 interface is ideal for situations where complex microprocessors are unavailable or overburdened.
A4988 Driver Features And Advantages:
Low RDS (On) Output
Automatic Current Decay Mode Detection or Selection
Mixed With Slow Current Decay Mode
Synchronous Rectification For Low Power Consumption
Cross Current Protection
3. 3 And 5 V Compatible Logic Supplies
Thermal Shut Down Circuitry
Ground Fault Protection
Load Short Circuit Protection
Five Selectable Stepping Modes: Full Step, 1/2, 1/4, 1/8, and 1/16
Features:
1High Performance: This motherboard has high performance, and it is equipped with a 32 bit STM32 processor, support storage card storage, expandable WIFI module, power failure relay module, break material detection switches and external card slot. 2Software Control: This motherboard allows for quick engraving and web control, mobile app control, etc. The for MKS DLC32 has mounting holes and board size compatible with the for MKS DLC and can also be used with for GRBLaser and for LightBurn PC software. 32.4 Inch TS24 R V2.1 Touch Screen: This touch screen provides a clear readout that simplifies the user's operation process, with a clear UI interface that intuitively presents the desired functions for easy operatio. 4High Accuracy: This 3D printer touch screen is able to work highly with the machine controller, thus providing high accuracy printing operation and printing excellent and stable products. 5Built In 8M Byte Flash Memory Chip: This 3D printer motherboard has a built in 8M byte flash memory chip to provide effective protection for more application scenarios.
Package List:
1 x for MKS DLC32 V2.1 Motherboard
1 x Blue USB Data Cable
1 x TS24 R V2.1 Display Screen
2 x 10pin 40cm Row Cable
3 x Driver
3 x Heatsink
