Specification:
Item Type: Radio Transceiver
Material: Aluminum Alloy
Model: H2
Battery Type: 3.7V 2100mAh lithium battery x 1 (Built in)
Antenna Receiving Frequency Range: 1MHz-6GHz
Catch Replay:
One of the best things about this radio transceiver is that it makes it very easy to catch and replay wireless signals from ISM band remotes.
Create a catch. All you need to do is go to the catching menu, set the frequency of the remote control key, press the red R record button and press the key on the remote control.
Then stop recording to save it to the storage card.
Now you can go to the Playback menu, select the file you just recorded and click Play. The exact same signal will be transmitted over the air, effectively replacing your remote key.
TX Microphone:
Receiver:
You can easily listen to standard NFM and WFM radio signals by connecting your speaker to the 3.5mm radio jack.
ADS B reception is easily enabled on the radio transceiver by selecting the inductor and lightning symbol in the upper right corner.
Hardware Configuration:
- 2 Inch LCD, with resistive touch screen
Navigation switch
Radio output
Microphone input
DC 2.1 interface
4 layer gold plating
HAVOC Features Include:
IQ file playback
Microphone FM transmission with CTCSS
CTCSS decoder
Frequency manager (save and load from storage card with categories and comments)
File manager
Soundboard wave file player (holds 8 bit mono files) storage card, wav directory)
ADS B receiver with map view
SSTV transmitter
Fully configurable transmitter signals
POCSAG transmitter
POCSAG receiver, decoder
Morse transmitter (FM tone and CW)
OOK transmitters for common remote encoders (PT2262, doorbells, remote outlets, some garages)
RDS (radio data system) PSN, RadioText and time group transmitters
Weather radio sounder receivers for M10 and M2K2
AFSK receiver
AFSK transmitter (Bell202)
Nuoptix DTMF synchronization transmitter
TouchTunes jukebox universal remote control
LCR (Language de Commande Routier) message generator
Street lighting control transmitter (CCIR tones)
Play Dead for emergencies
Fully configurable RF signal generator
RSSI radio output for pitch (for direction finding)
Features:
4 way arrow button, scroll wheel and selector button
Coin cell battery for saving settings and date, time
Micro storage card slot for data and code storage
SSB, AM, narrowband FM, wideband FM radio reception with cascaded spectrum
Broadband (18MHz) spectrum and cascade analysis
Monitoring of ships (AIS), cars (TPMS), electronic utility counter transponders (ITRON ERT)
For mode runs for firmware for use with SDR host software
Calibrates PPM for more accurate adjustments
Sleep mode saves energy by turning off the display only
Instructions:
The radio transceiver is only compatible with for One. If your for Blue does not have a baseband connector installed, you should have no mechanical problems.
It requires an external battery. Any USB connected battery should work.
It will not replace your handheld amateur radio receiver. The reception sensitivity varies depending on the frequency band, but the performance is not as good as a true amateur radio receiver.
Features:
1[3.5mm Jack] You can easily listen to standard NFM and WFM audio signals by connecting the speakers to the 3.5mm audio jack of this radio transceiver. 2[Catch and Replay] This radio transceiver can easily catch and replay wireless signals from the ISM frequency band remote control. 3[Intercom Function] Using 3.5mm audio jack, this SDR transceiver can also be used as a standard push to talk or voice activated walkie talkie radio. Plug the microphone into the jack, press and hold the right button to talk. 4[Multi Function] Featuring SSB, AM, narrowband FM, wideband FM audio reception, with spectral waterfal, broadband (18MHz) spectrum analysis and waterfall plot. 5[Easy to Use] Simply add a USB battery and you can explore the radio spectrum anytime, anywhere. The firmware can be used in conjunction with fast ARM processors. No computer is required (except for firmware reprogramming). 6[Expand Function] Add this device to your software defined radio, you can add LCD touch screen, navigation controls, headphone jack, real time clock, and mini storage card slot.
Package List:
1 x Radio Transceiver
1 x USB Data Cable
1 x SMA Antenna
