Specification:
Item Type: Oscilloscope Multimeter
Material: ABS
Oscilloscope:
Model: HDS2202S
Bandwidth: 200MHz
Channel: Dual channel, single channel signal source
Real Time Sampling Rate: 1GSa/s (single channel), 1GMSa/s (dual channel)
Sampling Mode: Normal, peak sampling
Storage Depth: 8K
Display: 3.5 inch LCD
Waveform Refresh Rate: 10000 wfrms/s
Input Coupling: DC, AC, grounding
Input Impedance: 1M2%, parallel to 16pF10pF
Probe Attenuation Coefficient: 1X, 10X, 100X, 1000X
Bandwidth Limit: 20MHz
Time Base Range: 5ns/div~500s/div, in steps of 1-2-5
Vertical Sensitivity: 10mV/div~10V/div
Vertical Resolution: 8bit
Low Frequency Response(-3db): 10Hz at BNC
Rise Time (Typical on BNC): 5ns
Trigger Type: Edge trigger
Trigger Method: Automatic, normal, single time
Trigger Level: 4 divisions from the center of the display screen
Automatic Measurement: Frequency, period, amplitude, maximum, minimum, average, peak to peak
Communication Interface: USB TYPE C
Power Supply: Polymer 18650 x 2 4400mAh (built in)
Multimeter Partial Performance Parameters:
Digital Display: 4 (maximum display 20000)
Input Impedance: 10M
Diode: 0-2V
Range and Accuracy:
- 00mV, (0.5%+5 dig)
- 0000V 20.000V 200.00V, (0.3%+3 dig)
- 0V, (0.5%+2 dig)
- 00mV 2.0000V 20.000V 200.00V, (0.8%+5 dig)
-
00V, (1%+5 dig)
DC Current:
-
000mA 200.00mA, (1%+5 dig)
-
000A, (2.5%+2 dig)
AC Current:
-
000mA 200.00mA, (1%+5 dig)
-
000A, (2.8%+5 dig)
Resistance ():
-
00 2.0000k 20.000k 200.00k 2.0000M, (0.8%+3 dig)
- 000M, (1%+3 dig)
-
00M, (3%+3 dig)
Capacitance (F):
-
000nF 200.00nF 2.0000F 20.000F 200.00F 2.0000mF, (3.0%+10 dig)
Frequency Response (Hz): (40-1000) Hz
Signal Source Partial Performance Parameters:
Waveform Output Frequency:
Sine Wave: 0.1Hz~25MHz
Square Wave: 0.1Hz~5MHz
Sawtooth Wave: 0.1Hz~1MHz
Any Wave: 0.1Hz~5MHz
Sampling Rate: 125MS/s
Number of Channel: 1
Output Amplitude: 20mVpp-5Vpp (high resistance), 10mVpp-2.5Vpp (50)
Waveform Length: 8K
Vertical Resolution: 14bits
Output Impedance: 50
Features:
1[Oscilloscope Mode] Waveform refresh rate up to 10000wfms/s. 2 way inputs, bandwidth of up to 200MHZ, providing better signal reception. Real time sampling rate is 1GSa/s, the record length can achieve 8k points. 2[Multimeter Mode] 4 1/2 bits of true RMS. Supports voltage, current, resistance, capacitance, diode, on off test. Maximum input voltage is 750V AC and 1000V DC. 3[Multi Function] Equipped with automatic range function, convenient for testing and debugging, with reading and waiting function, relative measurement function, more practical. 4[High Performance] The signal source adopts a 25MHz output frequency, 1GS/s sampling rate, 14 bit vertical resolution, supports 1M and 50 outputs. 5[USB Type C Interface] Not only supports mobile power supply, but also supports adapter charging and top grade computer connection. Computers can read saved images or CSV waveforms, which is very useful for viewing and analyzing waveforms or sharing waveform data in the future.
Package List:
1 x Oscilloscope Multimeter
2 x BNC to Crocodile clip
1 x USB TYPE C Cable
2 x Test Pen
1 x Probe Pen
1 x Bag
1 x Calibration Pen
4 x Plastic Ring
1 x Plastic Cover
1 x Hollow Iron Needle
1 x Instruction Manual
