Specification:
Item Type: Digital Oscilloscope
Model: HDS2202
Bandwidth: 200MHz
Channels: Dual channel and single channel signal sources.
Real Time Sampling Rate: 1GSa/s for single channel, 1GMSa/s for dual channel.
Sampling Mode: Normal, Peak Sampling
Storage Depth: 8K
Display: 3.5in LCD
Waveform Refresh Rate: 10000wfrms/s
Input Coupling: DC, AC, Grounding
Input Impedance: 1M2%, parallel to 16pF10pF.
Probe Attenuation Coefficient: 1X, 10X, 100X, 1000X.
Bandwidth Limit: 20MHz
Time Base Range: 5ns/div~500s/div, in steps of 1-2-5.
Vertical Sensitivity: 10mV/div~10V/div
Vertical Resolution: 8bit
- 3dB Low Frequency Response:10Hz at BNC
Typical Rise Time on BNC:5ns
Triggering Type: Edge Triggering
Triggering Method: Automatic, normal, single time.
Triggering Level:4 divisions from the center of the display screen.
Automatic Measurement: Frequency, period, amplitude, maximum, minimum, average, peak to peak.
Communication Interface: USB Type C
Power Supply: 2 x polymer battery 18650, 4400mAh. Shipped with built in battery.
Partial Performance and Parameters of the Multimeter:
Digital Display: 4The maximum display is 20000.
Input Impedance: 10M
Diode: 0-2V
DC Current: For 20.000mA, 200.00mA range,(1%+5digs) accuracy. For 10.000A range,(2.5%+2digs) accuracy.
AC Current: For 20.000mA, 200.00mA range,(1%+5digs) accuracy. For 10.000A range,(2.8%+5digs) accuracy.
Resistance: For 200.00 , 2.0000k , 20.000k , 200.00k , 2.0000Mrange,(0.8%+3 dig) accuracy. For 20.000Mrange,(1%+3 dig) accuracy. For 100.00Mrange,(3%+3 dig) accuracy.
Capacitance: For 20.000nF, 200.00nF, 2.0000F, 20.000F, 200.00F, 2.0000mF range,(3.0%+10digs) accuracy.
Frequency Response: 40-1000Hz
Waveform Output Frequency: 0.1Hz~25MHz sine wave. 0.1Hz~5MHz square wave. 0.1Hz~1MHz sawtooth wave. Any wave from 0.1Hz to 5MHz.
Sampling Rate: 125MS/s
Number of Channels: 1
Output Amplitude: 20mVpp-5Vpp under high resistance, 10mVpp-2.5Vpp at 50.
Waveform Length: 8K
Vertical Resolution: 14bits
Output Impedance: 50
Features:
1Oscilloscope Mode: Waveform refresh rate up to 10000wfms/s. Supports 2 inputs, with a bandwidth of up to 200MHz, providing better signal reception. 1GSa/s real time sampling rate, with a record length of up to 8k points. 2Multimeter Mode: 4 1/2 bits of true RMS. Can test voltage, current, resistance, capacitance, diode, on and off test. Also has auto ranging function, convenient for testing and debugging. The maximum input voltage is 750V AC and 1000V DC. Independent multimeter and oscilloscope input. Read and wait function. Relative measurement function. 3Reliable Work: 1GS/s sampling rate, 14 bit vertical resolution, supporting 1Mand 50outputs, which largely simplify your measurement work. 4Wide in Match: The USB type C interface not only supports mobile power supply, but also supports adapter charging and computer connection. Computers can read saved images or CSV waveforms, which is very useful for viewing and analyzing waveforms or sharing waveform data in the future. 5Simple Carrying: Comes with a compact size and a light weight as well, the 2 in 1 oscilloscope multimeter is very convenient to carry for outdoor working.
Package List:
1 x Handheld Oscilloscope
1 x BNC to Crocodile Clip
1 x USB Type C Data Cable
2 x Test Pen
1 x Probe Pen
1 x Bag
1 x Calibration Pen
4 x Plastic Ring
1 x Plastic Cover Head
1 x Circular Iron Needle
1 x User Manual
