Specification:
Features:
The module uses high-quality relay, the maximum load of the normally open interface: AC 250V/10A, DC 30V/10A.
Using patch optocoupler isolation, strong driving ability, stable performance; trigger current 5mA.
The module working voltage is available in 5V, 9, 12V, 24V.
The module can be triggered by a jumper to set a high level or a low level.
Fault-tolerant design, even if the control line is broken, the relay will not move.
Power indicator (green), relay status indicator (red).
The interface design is user-friendly, all interfaces can be directly connected through the terminal block, very convenient.
Specification:
Module Size:50 x 41 x 18.5mm / 1.97 x 1.61 x 0.73in
Hole Diameter: 3.1mm/0.12in
Hole Interval Distance:44.5 x 35.5mm / 1.75 x 1.4in
Wiring Diagram:
DC+: Connect the positive pole of the power supply (the voltage is required by the relay, there are 5V.9V.12V and 24V selection).
DC-: connected to the negative pole of the power supply.
IN1:1 signal signal trigger terminal, you can set the high or low level control relay to pull in.
IN2: 2 channel signal trigger terminal, you can set the high or low level control relay to pull in.
Relay output:
NO1: 1 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM1.
COM1:1 channel relay common interface.
NC1: 1 channel relay normally closed interface, short circuit connection with COM1 before the relay is closed, suspended after suction.
NO2: 2 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM2.
COM2: 2 channel relay common interface.
NC2: 2-channel relay normally closed interface, short-circuit with COM2 before the relay is closed, and float after the suction.
High and low trigger selection:
- S1 is a high-low trigger selection for 1 relay;
- S2 is the high and low level trigger selection of 2 relays.
3 com is shorted with low, the corresponding relay is triggered by low level, and when com is shorted with high terminal, it is triggered by high level.
Package List:
1 x Module
Features:
1The module uses highquality relay, the maximum load of the normally open interface: AC 250V/10A, DC 30V/10A. 2Using patch optocoupler isolation, strong driving ability, stable performance; trigger current 5mA. 3The module working voltage is available in 5V, 9, 12V, 24V. 4The module can be triggered by a jumper to set a high level or a low level. 5Faulttolerant design, even if the control line is broken, the relay will not move.
Package List:
