Specification:
Condition: 100% Brand New
Item Type: Door Controller
Material: PCB
Model: C3-200
CPU: 32 bit MIPS CPU
RAM: 32M bit
Flash Memory: 256M bit
User: 30000
Event Buffer: 100,000
Power/Current: DC 9.6V-14.4V, rated maximum 1A
Reader Port: 4 (26-bit Wiegand, 8-bit PIN burst)
Communication: RS485, TCP/IP
Baud Rate: 38,400bps (recommended) / 9600bps, 19,200bps, 57,600bps (optional)
Input Port: 6
Output Port:
2 (4 FORM-C relay output, SPDT 5A @ 36VDC / 8A @ 30VAC)
2 (4 auxiliary FORM-C relay output, SPDT 2A @ 30VDC)
LED Indicator: Communication, power, status and punch card
Battery: 1 x CR2032 battery (Built-in)
Operating Temperature: 0C - + 55C
Working Humidity: 10%-80% relative humidity without condensation
Features:
1It allows communicate at 38.4Kbps via RS-485 configuration or Ethernet TCP/IP networks. 2Large capacity, it supports 30,000 cardholders, which can easily and efficiently meet your needs. 3Various hardware protection measures, there is excessive protection, voltage protection, inversion protection for the power supply and the entire input and output terminal. 4It can be integrated with other security systems such as CCTV, fire alarm, bas (building automation system) and other systems to configure the total security system. 5Supports different Wiegand formats, and can connect to different readers, including ID card reader. 6Connect with a variety of sensors, alarms, exit buttons, electric lock and other devices. 7Variety of communication function, which can bring you much convenience. 8Using a serial or TCP / IP communication, it provides a reliable network system. 9B/S structure software, it is easy to manage the system by client PC browser. There is no need to install software on each client. 10Allows you to set normally opening after using the first card. 11Real-time monitoring of door status, using the management software, it allows real-time control and control of the opening of doors and closing of the entire system. 12Link different doors with special logic that one door is open, others must be closed. 13Multi-card operation, this function is used to manage visitors or to manage a special place of high security. Doors will open when the cards registered in number are read. 14With anti-return and force mode, making it safer for using. 15The system integrator can use the SDK to integrate the hardware into their existing access control software system or develop new software.
Package List:
1 x Access Control Panel
1 x Instruction
