Specification:
Item Type: Baby Monitor
Material: ABS
Camera:
Working Power Range: 2400MHz-2483.5MHz
Transmit Power: 17dBm Maximum
Monitoring Sensitivity: -88dBm
Spread Spectrum TX Type: Frequency Hopping Spread Spectrum
Modulation Method: GFSK
Transmission Rate: 3Mbps
Transmission Distance: Approx. 100m/328.1ft
Operating Temperature Range: 0 - +40
Working Humidity Range: 85%RH
Working Environment: Indoor Use
Image Sensor Type: 1/3in color CMOS image sensor
Effective Pixels: H: 640, V: 480
Lens: 70 Degrees
Viewing Angle (diagonal): EFL=3.6mm. F=2.8
Infrared LED: 7 infrared LEDs, 5m/16.4ft night vision distance
Power Supply: DC5V
Other Special Features: Built-in microphone/speaker
Wireless Monitor:
Display Type: Color TFT 2.4in
Resolution (Pixels): 960x240 (RGB)
Wireless Monitoring: H: 80 degrees V: 100 degrees
Battery: 3.7 vli-polymer (built-in)
Battery Capacity: 200mAh
Voltage: 100-240V
How to Use:
When the power is turned on, the camera will work normally. The screen can display the monitoring screen in real time, and it can also be connected to the wireless network. After connecting to the network, there are more functions to use.
Features:
- 4G wireless digital signal transmission, more than 250 frequency hopping, free from WIFI interference. 22.4inch TFT highdefinition LCD screen, 960x240 (RGB) resolution, the image display is clearer. 3Builtin baby sleeping lullaby, it can be played by controlling the camera on the screen. 4Support 2way realtime audio function. Realtime temperature detection, alarms when the temperature is too low or too high. 5Allows to set up night light, which can be used for night lighting. 7 infrared LEDs, good night vision effect, the distance is up to 5m. 6The digital signal is encrypted for transmission and has good security, which is dependable to use.
Package List:
1 x Camera
1 x Monitor
2 x Adapters
1 x Manual