Specification:
Condition: 100% Brand New
Item Type: Electronic Pulse Massager
Material: ABS
Power Supply Mode: Lithium Battery
Battery Capacity: 1200mAh
Usage:
Prepare the massage patch
1) Clean the area that needs to be massaged, and remove oil stains and stains on the skin surface.
2) Gently tear off the protective paper on the surface of the massage patch: do not discard the protective paper. After the massage patch is used, place the patch on the protective paper.
3) A pair of patches on an output wire are placed on the massage site, and a wire can only massage one person, and the wire can be placed on the desired massage site.
Replace the patch regularly
1) Use healthier
Special staff use special stickers, specific patches are used for specific purposes, and different patches are used for different parts.
2) The effect is more significant
Long-term use will reduce the viscosity of the patch and affect the massage effect.
3) Shared by the whole family
Purchased by one person and used by the whole family.
4) Convenient and fast
Independent packaging, light and easy to carry, replace at any time, simple operation.
Reminder: For your healths, it is recommended to use the patch 100 times or replace it every 2 months. If the method is not correct and the viscosity decreases, please replace the patch in time.
1. Charging: Take the accessory charger and the charging cable, connect the USB connector, and then plug the DC head of the charging cable into the charging socket of the host, and then plug the charger into the 220V power supply. At this time, the light of the massager will light up. , When charging is completed, the light will automatically turn off. Note: When applying heat, please connect the charger and use it together.
2. Electrode preparation: Take the conductive patch and the needle thread (buckle thread) butt and connect, put the conductive patch on the corresponding acupuncture point or pain point of the massage, and then put the other end of the needle thread (buckle thread) Insert the pulse output port 1 or pulse output port 2 of the host.
- Turn on the host by pressing and holding the "on" button for 3 seconds. (Voice navigation is on)
- Follow the voice navigation, press the "time" button to select the time you need to massage, and then press the "strength increase 1" or "strength increase 2" button. According to your body's feelings, it is suitable for comfort. If you need to reduce the strength, please press "strength" "Minus button", if you feel that the maximum strength is not enough, please plug in the charger.
-
Start the hot compress function: first insert the plug of the hot compress into the thermotherapy output port of the host, then: turn on-press the "time" button to select the time-long press the "mode" button for 3 seconds, the voice prompts beauty, at this time the hot compress Start to fever (if the temperature is too low, please press the "mode" button for 3 seconds, the voice prompts heat), when the hot compress begins to heat up, tie the hot compress to the area that needs hot compress, and the hot compress starts.
-
Voice switches: If you don't need the voice prompt function during use, please press and hold the time button for 3 seconds to turn off the voice function, and when you need to enable it again after turning it off, press and hold the "time" button for 3 seconds to turn it on.
- Switching between Chinese and English. This instrument has the prompt function of Chinese and English. When you need to switches between Chinese and English, press the "Chinese/English" button.
- During the massage, you can change the massage mode at will. Press the "Mode" button to select one by one. After selecting, you need to press the "Strength Increase" and "Strength Decrease" buttons again to adjust the strength.
- Time setting: Quickly press the "time" button to set the time, or standby and other operations.
- Lighting function: Press the "Switches" button twice to turn on the lighting, and then press the "Switches" button twice to turn off the lighting.
Mode key: The ten massage modes are switched. Each time you press the key, the massage mode is changed.
Strength increase key: Strength can be adjusted from 1-8 levels, when the strength is displayed as the last 1 grid, 8 grids is the maximum; it can be automatically increased according to individual needs.
Strength weakening key: Strength 1-8 levels can be adjusted, when the strength shows multiple levels, you can adjust the weakening according to individual needs.
Note: When using the hyperthermia function, you must first connect the hyperthermia cable and then turn on the hyperthermia function, otherwise it may cause circuit protection (dead state). If the circuit freeze state occurs accidentally, the following methods can be used to recover: Use a small wooden pick (a toothpick is fine), insert it into the small hole on the back of the machine, press it lightly, and then charge the machine for a few seconds to restore the normal state.
Safety Precautions:
Do not use with the following electronic equipment:
- Those who use heart rate regulators and embedded electronic devices
- Those who use artificial heart-lung pacemakers and life-continuation electronic devices
- Those who use Electrocardiograph equipment and wear electronic equipment.
If the above electronic equipment is used at the same time, it may cause danger due to incorrect operation.
Those who have the following conditions must use with caution:
- Patients with malignant tumors.
- Those with infectious diseases.
- Menstrual period and pregnant women, women after abortion.
- People with heart disease cannot use it near the heart.
- People who are unwell with fever and cold.
- People with abnormally sensitive skin.
- Do not use this product in the following parts of the human body: the mouth, eyes, perineum, and skin trauma.
- Do not use it with other massage devices or liniment at the same time.
- Please do not use this product on an empty stomach.
- Please be cautious when you are unwell or dizzy. This product is a massage instrument, not a treatment product.
Features:
1Double pulse output, equipped with three output holes, heat therapy output. A single machine can be used for two people, imitating the traditional Chinese massage techniques and real people kneading massage acupuncture, massage and other functions. 2The bottom is equipped with a charging interface, ecofriendly and recyclable lithium batteries. Just connect the plug to the USB cable, plug the USB connector into the instrument, plug the power plug into the power source, and connect it to charge. The rear LED light will light up when charging. 3It comes with Chinese and English switching, which can be switched with one button, which is convenient for various users to use. Real human voice pronunciation, standard and easy to distinguish. 4The rear highfidelity speaker, the navigation voice is clear and easy to distinguish, it can also be used by the hard of hearing patient, and there will be no noise or mixing lights after longterm use. 5The rearmounted LED light can be turned on by doubleclicking the switches key. The light is long lasting, which is suitable for daily use at night, and is more considerate and practical. 6It adopts LCD display, a large ultraclear screen. Compared with the traditional black and white display, it is easier to distinguish and control the working interface, especially for the elderly with poor eyesight.
Package List:
1 x Host
1 x Charging Head
1 x USB Charging Cable
2 x Button Wire
1 x Pin Plug Wire
2 x White Patch
8 x Blue Patch
