Specification:
Features:
The outside box is made of high quality aluminum material, which is more durable
Large dial, for clear reading, fashionable and generous.
Suitable for water, or hydraulic oil as a medium, for a variety of pressure vessels, pipes, valves and other pressure test
Application: Normal tap water pressure of 0.3MPa, high-rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa. (Tap water 0.1MPa 1KG pressure)
This water pump is easy to install and use.
Specifications:
Material: aluminum
Pressure column outer diameter: 2.8cm / 1.10in
Pressure: 2.5MPa
Flow: 13ml / time
Color: Yellow
Weight: 2090g
How to use? (Instructions)
1. Connect the water hose to the water pipe
2. Close the switch when the pipe is filled with water and the air is discharged
3. Fill the tank with water, and then tilt the plate up and down, began to test pressure
4. When the pressure gauge readings rise to the need for pressure, you can stop the pressure;
5. After stopping the pressure, if the pressure gauge does not drop on the pressure gauge, it can prove that the pipe pressure performance is good, on the contrary, it proves that the measured pipe sealing performance is not good,
The specific steps of the test pressure are as follows:
- When measuring pressure, shake the jack until the pressure gauge pointer to 0.9-1.0 or so, that is the current pressure is 3 times the normal water pressure
- Keep this pressure for a certain amount of time. Different water pressure measurement time is not the same, PPR, aluminum plastic PPR, steel PPR and other welded pipe is 30 minutes
- Water pipe compression test results to determine:
The test pump in the specified time within the needle did not drop the slightest or drop less than 0.1 on the water pipe that is good, but also shows that the test pump is also a normal working condition.
Package included:
1 x Test pump
1 set x Accessories
Note:
Please note that the dashboard and hose screen prints for this product will be sent randomly and make sure you don't mind before ordering.
Features:
1The outside box is made of high quality aluminum material, which is more durable 2Large dial, for clear reading, fashionable and generous 3Suitable for water, or hydraulic oil as a medium, for a variety of pressure vessels, pipes, valves and other pressure test 4Application: Normal tap water pressure of 0.3MPa, highrise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa1.0MPa. (Tap water 0.1MPa 1KG pressure) 5This water pump is easy to install and use
Package List: