Specification:
Features:
This is a normally open proximity switch sensor with detection distance of 8mm to 10mm.
When proximity switch is close to some target object, it will send out control signal.
Widely used in automatic control industry for detecting, controlling, and non-contact switching.
High sensitivity, quick response, stable performance.
Non-contact detection avoids the sensor and the target object from damages.
Specification:
Model: LJ18A3-8-Z/EX
Detection distance: 8mm10%
Setting distance: 0-7mm
Delay distance: <10% of detection distance
Detection object: Magnetic metal(The detection distance decreases when it is non-magnetic metal)
Standard detection object: Iron 30301mm
Response frequency: 0.5kHz
Current consumption: N.P type: <13mA, D type: <0.8mA, A type: <1.7mA
Control output: N.P type: <300mA, D type: <200mA, A type: <400mA
Loop protection: N.P.D type: reverse connection protection, surge absorption, load short circuit protection, type A: surge absorption
Ambient temperature and humidity: -30-65, 35-95%RH
Temperature influence: Temperature range -30-65, at 23, 15% detection distance; Temperature range -25-60, at 23, 10% 0detection distance
Insulation impedance: >50M
Housing material: brass nickel plating
Detection surface: ABS
Package list:
1 * Inductive Proximity Switch
Note:
- Please allow slight error due to manual measurement.
- Different monitor colors may be different. Thanks for your kind understanding.
Features:
1This is a normally open proximity switch sensor with detection distance of 8mm to 10mm. 2Widely used in automatic control industry for detecting, controlling, and non-contact switching. 3When proximity switch is close to some target object, it will send out control signal. 4High sensitivity, quick response, stable performance. 5Non-contact detection avoids the sensor and the target object from damages.
Package List:
