Specification:
Item Type: Ultrasonic Cleaner
Model: 120HTD
Cleaning Tank Capacity: 2L
Cleaning Tank Size: Approx 150x140x100mm / 5.91x5.51x3.94in
Ultrasonic Frequency: 40KHz
Ultrasonic Power: 60W
Heating Power: 100W
Number of Vibration Heads: 1
Working Time Range: 1-99min
Temperature Range: 0-80
Liner Material: SUS304
Shell Material: Stainless Steel
Net Basket: Equipped
Noise Reduction Lid: Equipped
Operation Process:
- After unpacking, shake the machine slightly, listen for noise in the case, and confirm whether the parts are loose;
- Place the machine in a ventilated and dry place to ensure that the machine is in a horizontal position;
- Add an appropriate amount of cleaning fluid as required for cleaning (2/3 tank depth5. Adjust the working time of ultrasonic:
Mechanical timing type: After turning on the power, turn the timer knob on the right clockwise until the required cleaning time is reached on the time scale of 0-20 minutes. The indicator light is on and the sound of ZIZI is emitted, indicating that the ultrasonic starts to run
Digital and power-adjusting type: After the power is turned on, the digital screen on the right displays 0700, which means that the default setting time is 7 minutes 00 seconds. Each time you press the TIME+ or TIME- button, the time will increase or decrease by 1 minute; after the time is set by the button, press the ON/OFF button, the ultrasonic will start to work, and the digital timer will count down. The machine's time setting has a memory function. After the set time is reached, press ON/OFF repeatedly, and the machine will continue to work at the time set previously.
- Adjust working temperature (select heating if necessary; mechanical type has no heating function):
Mechanical type: turn the temperature controller on the left clockwise until the required temperature (above 20 is fine), the heating indicator lights up, and the heating elements starts to work
Digital and power-adjusting type: The left digital screen displays 50 and the actual temperature XX, indicating that the default set temperature is 50. Each time you press the TEMP+ or TMEP- key, the temperature will be adjusted up or down by 1; after the working temperature is set by the key, press the ON/OFF key once to start the heating element. (The heating function can switch on and off freely is another feature of this machine)
- Shut down after finishing work:
After the cleaning work is completed, if you do not need to operate again, you should first turn off the heating elements and disconnect the power supply; after the cleaning fluid has cooled to normal temperature, pour the cleaning fluid, and wipe the inner tank and shell of the machine. The used machine should be left dry In a ventilated place, avoid moisture in the control circuit.
Uses: jewelry, industrial parts, hardware tools, watches, dentures, surgical instruments, PCB circuit boards and other products
FAQ:
Q: What is an ultrasonic cleaner?
A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently.
Q: Which products can this ultrasonic cleaner clean?
A: Many products can be cleaned. Common such as glasses, necklace, earring, bracelet, electronic, watch, false tooth, printer ink head, shaver head, nib, coin, badge, nipple, etc.
Q: Which detergents can be properly added for better cleaning during cleaning?
A: You can add cleaning liquid or abluent, such as: cleanser essence, soapy water, disinfectant, etc. However, do not add acid or alkaline solution to the machine to prevent ABS from corrosion and damage.
Features:
1The working time of ultrasonic can be freely adjusted within 1-99 minutes, maximum heating temperature 80, suitable for different occasions. 2Built-in safe and efficient transducer to improve conversion efficiency and safety performance. 3The shell is made of high quality fingerprint-proof stainless steel embossing board, which is beautiful and elegant. 4The cleaning tank is stamped with premium stainless steel, without any welds for better waterproof performance. 5Adopt high quality components, featuring high ultrasonic efficiency, strong power, good cleaning effect.
Package List:
1 x Ultrasonic Cleaner
1 x English Manual
1 x Power Cord
