Specification:
Item Type: Auto ECU Chip Tuning Interface
Material: ABS
Length: Approx. 10.5cm/4.1in
Width: Approx. 4.7cm/1.9in
Height: Approx. 2.7cm/1.1in
(Due to manual measurement, there may be a deviation of 1-2 mm)
Support Multi-languages:
Afrikaans, Albanees, Bahasa Melayu, Czech, Dansk, Deutsch, Esti, English, Espanol, Filipino, Finnish, Galician, French, German, Indonesian, Italian, Hrvatski, kiswahili, Latviesu,Malti, Nederlands, Norsk, Polish, Portuguese, Roma Swedish, Turkish.
Fitment:
Fit for Fiat 6F3- Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fit for Fiat 6JF - Full Read / Write Micro and EEprom over K-line.
Fit for Fiat 8DF - Full Read / Write Micro and EEprom over K-line.
Fit for Fiat 8F2 - Full Read / Write Micro and EEprom over K-line and CAN.
Fit for Fiat 8F3 - Full Read / Write Micro and EEprom over K-line and CAN.
Fit for Fiat 8GM - Full Read / Write Micro and EEprom over CAN.
Fit for Fiat 8GS - Full Read / Write Micro and EEprom over CAN.
Fit for Fiat 5SF3 - Full Read / Write Flash and EEprom over CAN.
Fit for Fiat 5SF3 - Full Read / Write EEprom over K-Line.
Fit for Fiat 5SF8 - Full Read / Write Flash and EEprom over K-line and CAN.
Fit for Fiat 5SF9 - Full Read / Write Flash and EEprom over CAN.
Fit for Fiat ME7.9.10 - Full Read / Write Micro over CAN.
Fit for Fiat ME7.6.3 - Full Read / Write Micro over CAN.
Fit for Opel 6O2 - Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fit for Opel 6O3 - Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fit for Opel 6JO - Full Read / Write Micro and EEprom over K-line.
This module adds boot mode support for controllers with the tricore processor Features:
- Auto detects ECU and processor type. No need to select from list, everything is automatic!
- Read/Write of all memories Eeprom, Irom, Xrom (where possible)
- Patch function for OBD Flashing of TPROT ECU's.
- TPROT / DS check feature, for testing if TPROT is active without opening ECU.
- Supports for upto TP12
- Supports for Siemens (current only for ECU's without password protection),
- Support for unlocking for Simos PCR and For Simos 8.
- Checksum Correction supported for MEDC17.
Powerful programming tool. It offers general reading / writing operations and checksum support, however it also includes some additional features:
- Excellent recovery functions. In some cases this tool can recover ECU's which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory).
- Selectable full / partial reading and writing when the ECU allows this function.Selectable reading / writing speed.
- Writing "changes only" function for faster programming (when supported by the ECU).
- Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication.
- Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems.
- Boot mode support for ECU's with C167 and ST10 processors.
- EEprom read/write functions for some ECU's are included.
- For MEDC17 TPROT level checking without opening the ECU.
Features:
1Portable diagnostic scanner. It can read/write Micro, Flash and EEprom without using BDM programmer. 2Powerful programming tool. It provides regular read/write operations and verification support. 3Establish compliance with standard specifications and strictly follow factory quality control. 4Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication. 5Excellent recovery functions. In some cases this tool can recover ECU's which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory).
Package List:
1 x Programming Tool
1 x OBD2 Cable
1 x USB Data Cable
1 x CD
