Specification:
Item Type: Oil Cooler Flush Kit
Material: Metal
Fitment:
Replacement for Ford Powerstroke 6.0L 2003 - 2010
Replacement for International VT365 / VT275
Features:
1The kit can solve the problems that high engine oil temperature, EGR cooler failure, and premature oil breakdown which causes earlystage failures in the HEUI fuel injection system and even the engine itself in turn. 2Allow the existing cooler to be backflushed on the vehicle. By directing water flow in the opposite direction of normal travel, contaminants are dislodged and, in most cases, the cooler is returned to likenew effectiveness. 3Advisable to regularly monitor for Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification, performing an oil cooler flush is recommend. 4Rather than repeatedly replacing the cooler, the kit allows the owner or technician to quickly restore the cooler to it's former effectiveness, and prevent thousands of dollars of engine and fuel system damage. 5When disturbed, the quickconnect hose between the oil cooler and the EGR cooler will often begin leaking, resulting in a comeback. The tool does not require tampering with this connection, averting much frustration. 6Equally effective on trucks equipped with the factory EGR cooler, or on those previously equipped with an EGR delete kit for offroad use. Can additionally be used to reroute coolant flow on EGR delete equipped trucks for better coolant flow through the oil cooler and lower for Delta T. 7Blocks flow into the EGR cooler while the flush adapter is in use so that 100% of the water force is directed through the cooler for maximum cleaning effectiveness. 8Removal of the factory cooling manifold (which routes coolant from the oil cooler into the EGR cooler) is not required. Can be reused over and over again and the vehicle is not altered, and there is no need for any part of the tool to remain on the vehicle.
Package List:
1 x Adapter
1 x Oil Hose
